Filter
Top Products
8
OPERATION (CONTINUED)
CD PLAYBACK NOTES:
•
•
•
•
•
•
TO PAUSE A CD
During CD playback, if you wish to pause the disc momentarily,
press the PLAY/PAUSE ( )/Power On button. Playback stops
but the disc continues to spin and the elapsed time will blink.
Press the PLAY/PAUSE ( )/Power On button again to release
pause and resume playback. The sound and the elapsed time in
the display stops blinking.
When reocrding ("burn") CDs, make sure the session is "finalized",
or simply record ("burn") only one session. You can find more
information in your recorder's manual.
This unit is capable of playing standard CDs or 3" singles; no
adapter is required.
If a disc is inserted incorrectly, dirty, damaged or not present al all,
"No Disc" will appear in the display.
If a disc is not recorded properly, a disc error will occur and the
unit will not play back the CD.
Playback will stop when you open the CD compartment, but it is
not recommended to open the compartment before the STOP ( )/
Power Off button is pressed.
If there is no activity for 30 seconds, the unit will turn itself off to
save the batteries.