Crown Audio VCA-MC4A Stereo Amplifier User Manual


 
Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: 574-294-8200
FAX: 574-294-8FAX
www.crownaudio.com
Crown’s Three-Year, No-Fault, Fully Transferable Warranty
Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown amplifi er
product—an unsurpassed industry standard. With this unprecedented No-Fault protection, your
new Crown amplifi er product is warranted to meet or exceed original specifi cations for the fi rst
three years of ownership. During this time, if your unit fails, or does not perform to original speci-
fi cations, it will be repaired or replaced at our expense. About the only things not covered by this
warranty are those losses normally covered by insurance and those caused by intentional abuse.
And the coverage is transferable, should you sell your unit.
See your authorized Crown dealer for full warranty disclosure and details. For customers outside
of the USA, please contact your authorized Crown distributor for warranty information or call
574-294-8200.
7/05 135427-1C
Specifi cations subject to change without prior notice. Latest
information available at www.crownaudio.com.
Crown and Crown Audio are registered trademarks of Crown
International. Other trademarks are the property of their respective
owners. Printed in U.S.A.
©2005 Crown Audio
®
, Inc.
Specifi cations
VCA-MC4A
Pins: VCA, GND, +10V, VCA (x2)
Control Voltage: 0 to +10VDC between GND
and VCA
Weight: 3.6 oz (102 g)
Dimensions:
Gain Module: 5-1/2 in x 2-1/2 in
(14.0 cm x 6.4 cm)
Connector Break-Out: 5-15/16 in x 1-1/2 in
(15 cm x 3.8 cm)
VCA-MC8
Pins: VCA, GND, +10V, VCA (x4)
Control Voltage: 0 to +10VDC between GND
and VCA
Weight: 5.0 oz (142 g)
Dimensions:
Gain Module: 5-1/2 in x 2-1/2 in
(14.0 cm x 6.4 cm)
Connector Break-Out: 5-15/16 in x 1-1/2 in
(15 cm x 3.8 cm)
VCA-MC4A
VCA-MC8
1-VCAP
Pins: VCA, GND, +10V
Weight: 3.0 oz (85 g)
Dimensions: 2-1/2 in x 4-1/2 in
(6.4 cm x 11.4 cm)
4-VCAP
Pins: VCA, GND, +10V (x4)
Weight: 6.5 oz (184 g)
Dimensions: 4-1/2 in x 4-1/2 in
(11.4 cm x 11.4 cm)
Choosing the Right Module
To order accessory modules for your amplifi er,
please refer to the model tag (located on the
back panel of the amplifi er) for your amplifi er’s
specifi c model number. Then refer to the chart
below to select the correct accessory for your
requirements.
CTs 4200: VCA-MC4
CTs 4200A: VCA-MC4A
CTs 8200: VCA-MC8