Crown Audio CTs 2-Channel Stereo Amplifier User Manual


 
AMPLIFIERS TOURING
Macro-Tech 2402: Advanced Reinforcement
Macro-Tech 2402
Advanced
FEATURES
Enhanced PIP2™ (Programmable Input Processor) connector
accepts new accessory modules that tailor the amplifi er for specifi c
applications.
Balanced XLR and 1/4-inch phone jacks for each channel on the
standard PIP-FXQ module.
Full Protection from shorted, open and mismatched loads, general
over-heating, DC, high-frequency overloads, and full internal fault
protection are provided by our “Quad-Mute” protection scheme.
Two mono modes (Bridge-Mono and Parallel-Mono) for driving
a wide range of load impedances.
POWER OUTPUT*
2-ohm Dual 4-ohm Dual 8-ohm Dual 4-ohm 8-ohm
Model (per channel) (per channel) (per channel) Bridge Bridge
MA-2402 1,050W 800W 520W 2,070W 1,585W
*Maximum average power in watts at 0.1% THD, 1 kHz.