Filter
Top Products
Radio Operation
1 Slide the FUNCTION SWITCH (8) to
RADIO.
2 Press the AM/FM BUTTON (7) to the desired
radio band (AM or FM ).
3 Select the desired radio station by rotating
TUNING KNOB (17).
4 Adjust the VOLUME KNOB (9) to the desired
sound level.
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA (28) , move the wire until
the reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
not connect the FM WIRE ANTENNA (28) to any
outside antenna.
Control Locators
Unit Controls
22 Spindle
23 Turntable
24 Adapter For 45 rpm Records
25 Tone Arm
26 Speed Control Switch
27 Tone Arm Rest
28 FM Wire Antenna
29 AC Power Cord
5
Cassette & Radio Operation
Cassette Operation
1 Slide the FUNCTION SWITCH (8) to TAPE.
2 Insert a prerecorded tape through
the
CASSETTE
DOOR (21). Tape will slide into the cassette
mechanism and start playing.
3 Adjust the volume level by turning the VOLUME
KNOB (9).
4 For fast forwarding, press the CASSETTE
EJECT/F.F (20) half way in. Pressing again,
will stop the fast forwarding and return the
cassette to the playing mode.
5 To stop and eject the cassette, press the
CASSETTE EJECT/F.F (20) in completely.
6 When one side of the tape finishes playing, the
cassette will automatically stop.
NOTE: Remove the tape from the unit when it is not
in use or stopped.
8
22 23 24
252627
2928
Antenna