Filter
Top Products
Radio Operation
1 Select the FUNCTION SWITCH (8) to select
RADIO mode.
2 Set the AM/FM BAND SWITCH (7) to the
desired radio band (AM or FM).
3 Select the desired radio station by rotating
TUNING KNOB (17)
4 Adjust the VOLUME KNOB (9) to the desired
sound level.
Control Locators
Unit Controls
22) SPINDLE
23) TURNTABLE
24) ADAPTER FOR 45 RPM RECORDS
25) TONE ARM
26) SPEED CONTROL SWITCH
27) ARM REST
28) SPEAKER INT. /EXT. SWITCH
29) LINE OUT JACK
30) EXTERNAL SPEAKER JACK
31) AC POWER PLUG CORD
32) EXTERNAL ANTENNA
5
Cassette & Radio Operation
Cassette Operation
1 Turn the function switch (8) to TAPE position.
2 Insert a prerecorded tape through the CASS
DOOR(21). Tape will slide into the cassette
mechanism and start playing.
3 Adjust the volume level by turning the VOLUME
(9).
4 For fast forwarding, press the EJECT/F.F (20)
half way in. Pressing (20) again, will stop the
fast forwarding and return the cassette to the
playing mode.
5 To stop and eject the cassette, press the
EJECT/F.F (20) in completely.
6 When one side of the tape finishes playing, the
cassette will automatically stop.
NOTE: Remove the tape from the unit when it is not
in use or stopped.
8
22 23 24
252627
R
LINE OUT
INT.EXT.
L
28 29 30
3132
Antenna: for FM reception, the unit is provided
with a WIRE ANTENNA (32), move the wire
until the reception is clear and with no
interferences. For AM reception, the unit is
provided with a directional build-in ferrite antenna.
Rotate the set to find the position in which the
best reception is obtained. Do not connect the
EXTERNAL FM ANTENNA (32) to any outside
antenna.
Antenna