Filter
Top Products
6
About This Manual
Thank you for purchasing the Crosley The AutoRama
with Radio (CR711). Before operating this unit,
please read this manual thoroughly and retain it for
future reference.
Instructions in this manual describe the control
functions of the CR711.
Welcome Table of Contents
Getting Started & Basic Operation
Control Locators....................... 4
Unpacking................................ 5
Set Up...................................... 5
Power Up Your Crosley............ 5
Turntable Operation
Setting Turntable Speed.......... 6
Playing A Record..................... 6
Radio Operation
Radio Operation....................... 7
Antenna.................................... 7
General
Auxiliary Outputs..................... 7
Troubleshooting Guide.......... 8
Warranty.............................. 9
Turntable Operation
Turntable Operation
Turn the unit on by turning the ON-OFF SWITCH /
VOLUME CONTROL KNOB (3) clockwise to the
ON position.
1 Press the PHONO BUTTON (4) to select
PHONO mode.
2 Set the SPEED CONTROL SWITCH (13) to
desire speed (33 1/3,45 or 78 rpm). Place the
record on the TURNTABLE (15).
3 Pull the TONE ARM (12) slightly to the right
side until hear the “click” sound to activate the
turntable.
4 Move the TONE ARM (12) by hand to the record
and slowly lower it to the desired starting point.
Turn the VOLUME CONTROL KNOB (3) to
adjust the volume to the desired level.
5 At the end of the record, the TONE ARM (12)
will stop automatically. You must return the
TONE ARM (12) to TONE ARM REST (14) by
hand.
Accessory: ADAPTER FOR 45 RPM
To play a 45 rpm record, place the ADAPTER (11)
on the spindle and place the record over the adapter.