Filter
Top Products
TO PLAY THE 45RPM RECORD, PLACE THE
ADAPTER (1) ON THE SPINDLE.
Turn the unit on by switching the VOLUME ON/OFF
SWITCH(9) to the ON position.
1 Set the speed control switch to the appropriate
speed for your record, (33 1/3, 45 or 78 RPM).
Place the record on the turntable.
2 Lift the tone arm from its rest and place it gently
on the beginning of the record.
3 Adjust volume level to the desired listening
level.
4 At the end of the record, the tone arm will
automatically return to its rest and the record
will stop spinning.
5 Manually move the tone arm over the record
and gently place at the beginning of the desired
track. Re-adjust the VOLUME control.
6 At the end of the record, the tone arm will
automatically return to its arm rest. The red
power light will remain on until the unit is turned
off.
Turntable Operation
About This Manual
Thank you for purchasing the Crosley Turntable
(CR-48). Before operating this unit, please read this
manual thoroughly and retain it for future reference.
Instructions in this manual describe the control
functions of the CR-48.
Welcome Table of Contents
6
Turntable Operation
Accessory: ADAPTER FOR 45RPM
Getting Started
Control Locators....................... 4
Unpacking the Turntable ......... 5
Power Source ......................... 5
Turntable Operation
Turntable Operation ................ 6
Accessory:
ADAPTER FOR 45RPM ....... 6
General
Troubleshooting Guide ............. 7
Warranty ................................... 8