Crosley CR 54 CD Turntable User Manual


 
MANUAL SEARCH A STATION TO RECEIVE A WEAK BROADCAST SIGNAL
Press the UP/F-SKIP(7)or DOWN/B-SKIP(6) button by one press at a time to adjust the frequency that you wish to receive.
FM STEREO BROADCAST RECEPTION
STEREO display will light when a
stereo broadcasting station is receiver.
PRESETTING METHOD
20 broadcast stations of FM band and 12 stations of AM band can be stored to the preset memory.
a) During tuner mode, by using the auto search
or manual search methods to find a desired
broadcasting station or any desired frequency.
b) Press MEMORY(10) key to
make the channel display _ appear.
c) Press REPEAT=(PRESET) key to choose the
desired channel
d) press MEMORY(10) again, then the
desired station is stored in channel 1.
e) Repeat steps (a) to (d) for storing the various broadcast station to other channels or modifying the present channel.
f) To change the broadcast station of a certain channel to a different channel (Example; Change the 1422 kHZ broadcast
station from channel 6 to channel 8)
Press the REPEAT=(PRESET) key or the
numerical key to call the broadcast station of
the channel that you wish to change.
(EXAMPLE: Channel 6)
Press MEMORY (10) key to the presetting mode
and the channel display __ appear.
Press REPEAT=(PRESET) to change
the channel
(EXAMPLE: Channel 6 to Channel 8)
Press the MEMORY(10) once more, 1422kHZ
is set to channel 8.
NOTE: The original memory of channel 6 will not be change during above operations.
Put a disc inside and then press the
OPEN/CLOSE (18) key one time to close the tray.
After that, reading TOC will start.
TO PLAY THE DISC
Press PLAY/PAUSE(19) to play the CD
(After reading TOC, the disc can start to play anytime.)
TO PAUSE THE PLAYING
Press PLAY/PAUSE (19) during the disc is playing,
the playing time will flash.
One more press the PLAY/PAUSE (19) key will cancel
the pause condition.
TO STOP THE DISC
Press STOP(20) key
TO SPECIFY A TRACK TO PLAY
a) Press UP/F-SKIP(7) or DOWN/B-SKIP(6) to
choose a desired track.( Example: The 3rd track)
Each press will change the track number by one.
b) If the CD is stop and the PLAY/PAUSE(19) key is
pressed, the CD will start to play from track 3. If the
CD is playing, several seconds after UP/F-SKIP (7)
or DOWN/B-SKIP (6) is released, the CD will start
to play from track 3.
(During the CD playing condition, holding down the button will result in fast forward search or fast backward search.)
FAST FORWARD AND FAST BACKWARD
Hold down the UP/F-SKIP (7) or DOWN/B-SKIP (6) button during play.
When the button is held down, there will be a continuous change of CD tracks position.
This change of position can be performed even during pause.
TO CHECK THE REMAINING TIME OF THE DISC
Press REMAIN (12) one time during the disc is playing, then the
display will show the remaining time of the entire disc.
If press two more times of the keys, the display will return
to the original condition.
REPEAT PLAYING
Press REPEAT(9) key one time,ONE-TRACK REPEAT will be active.
With one more, ALL-TRACK REPEAT will be active.
With one further press, the repeat mode is cancelled.
PROGRAM PLAYING
a) In CD mode, Press MEMORY(10) key one time.
b) Specify a track to play with UP/F-SKIP(7) or
DOWN/B-SKIP(6) . (This can also be done with
the numerical keypad in the remote control.)
c) Pressing MEMORY (10) one time, then track 4 is stored into the
program 1 position. Step (a) to (C) can be used to store
up to 16 tracks into the program or modified the existing program.
d) Pressing PLAY/PAUSE(19) key to play the program.
e) Press STOP (20) when you wish to stop the play.
NOTE:If the program is already exist, press the MEMORY
and then press the PLAY/PAUSE(19) key, the program play will start.
The program will be cleared when the tray is opened or when the lid is opened.
CLEAR THE PROGRAM
Pressing the MEMORY(10) key one time and then press the STOP (20) key, the preset programs will be cancelled.
INTRO PLAY FUNCTION
a) During the stop condition, pressing the INTRO(8) key to start
the into playing. After that the first 10 seconds of each song
will be played.
b) If the INTRO (8) key is pressed again,
the CD will change to the normal playing mode.
RANDOM PLAY FUNCTION
A) Press RANDOM (17) key during CD playing or stop condition.
(Press once again will cancel the function)
B) If the CD is under stop condition, press the PLAY/PAUSE (19)
key to start the random playing.
C) If the CD is playing, the random playing will start in next song.
Note: Once the CD program is set, the random function can not
be activated before the program is cleared.
TUNER FUNCTION
Note: The type of reception bands, the frequency step, and the upper and lower limits of the
receiving frequency are depended on the specifications of different area.
AUTO SEARCHING A STATION
During the tuner mode, press TUNER(3) to
select the desired reception band.
Press UP/F-SKIP(7) or DOWN/B-SKIP(6) key, and then release
the button when the fast scanning start.The frequency will continue
to change and will automatically stop when a broadcast station is received.
NOTE:If the UP/F-SKIP(7)or DOWN/B-SKIP(6) key is pressed during auto searching, the searching will stop at that point.
When the frequency display pass through the upper limit or the lower limit, it will automatically changes to the lower
or the upper limit, respectively.
LOCATION OF PARTS
1) CD
2) PHONO
3) TUNER
4) SENSOR
5) LCD DISPLAY
6) CD / TUNER-BACKWARD SKIP
7) CD / TUNER-FORWARD SKIP
8) INTRO
9) REPEAT=(PRESET)
10) MEMORY
11) STAND BY INDICATOR
12) REMAIN
13) POWER
14) CD DOOR
15) MONO / ST.
16) EQ
17) RANDOM
18) OPEN/CLOSE
19) PLAY/PAUSE
20) STOP
21) VOLUME DOWN
22) VOLUME UP
23) MUTE
24) STAND BY
25) TURNTABLE
26) SPINDLE
27) ADAPTER FOR 45 RPM RECORDS
28) TONE ARM
29) SPEED CONTROL SWITCH
30) ARM REST
31) ADAPTOR JACK
32) SPEAKER
<Remote Control Function key>
33) OPEN/CLOSE
34) PHONO
35) 3
36) 2
37) 6
38) 5
39) 9
40) 8
41) EQ
42) 10+
43) SKIP BACKWARD
44) SKIP FORWARD
45) MEMORY
46) REPEAT
47) VOLUME UP
48) VOLUME DOWN
49) POWER STAND BY
50) MUTE
51) CD
52) TUNER/BAND
53) 1
54) 4
55) 7
56) 9
57) PLAY/PAUSE
58) STOP
Reading TOC
TRACK
After reading TOC
TRACK
Searching track 1
TRACK
Playing track 1
TRACK
While paused
TRACK
Stop condition (TOC display)
TRACK
Searching track 3
TRACK
Play track 3
TRACK
MEMORY
Program input complete
TRACK
Play operation
TRACK
INTRO
Intro setting (Stop condition)
TRACK
Intro playing
INTRO
Needles are available for additional charges, please call us at 1-800-926-7801
www.crosleyradio.com
TRACKREPEAT
One track repeat (flashing)
TRACK
REPEAT
All track repeat
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
POWER
REPEAT
MEMORY
VOLUME
+
-
0
10+
EQ
7
8
9
4
5
6
1
2
3
TUNER/
BAND
CD
MUTE
PHONO
OPEN/
CLOSE
/
SKIP
10
11
12
13
14
1918 20 21 22 23 24
RANDOM
1 2 3 4 5 6 7 8
9
15
16
17
AM
KHz
CH
Memory display
TRACKREMAIN
Display of the remaining time
AM
KHz
CH
Choose Channel 1
AM
KHz
CH
Channel 1 presetting finish
AM
KHz
CH
Before change of channel
AM
KHz
CH
Presetting mode
AM
KHz
CH
After change of channel
AM
KHz
CH
1422KHz is stored in CH 8
25 26
27
282930
31
32
TRACK
Program input mode
MEMORY
TRACK
MEMORY
Choose track 4
AM
KHz
AM band selection
FM
MHz
STEREO
Stereo reception
AM
KHz
Search a desired station
AM
KHz
Broadcasting station in AM
TRACK
Random setting (stop condition)
RANDOM
TRACK
Random playing start
RANDOM
TRACK
During random search
RANDOM