Filter
Top Products
Getting Started
Control Locators........................... 4
Unpacking.................................... 5
Power Source.............................. 5
Turntable Operation
Turntable Operation..................... 6
Tone Control ................................ 6
Accessory: Adapter for 45 rpm
...................................................... 6
General
Troubleshooting Guide................ 7
Warranty....................................... 8
6
About This Manual
Thank you for purchasing the Empire Turntable
(CR46). Before operating this unit, please read this
manual thoroughly and retain it for future reference.
Instructions in this manual describe the control
functions of the CR46.
Welcome Table of Contents
Turntable Operation
Turntable Operation
1 Turn the unit on by switching the ON/OFF
VOLUME KNOB (11) to the ON position. The
POWER LIGHT INDICATOR (6) will come on.
2 Use the CUE LEVER (5) to raise the tone arm.
Move the TONE ARM (12) by hand over the
record and slowly lower it using the CUE LEVER
(5). Adjust the volume to the desired level by
turning the ON/OFF VOLUME KNOB (11).
3 At the end of the record, the tone arm will
automatically return to its rest. The red power
light will remain on until the unit is turned off.
Accessory: ADAPTER FOR 45 RPM
To play the 45 rpm record, place the adapter on the
center of the turntable.
This unit includes ONE (1) adapter found in the
polybag of the instruction manual.
Use the Tone control to adjust the sound quality.
Tone Control