Filter
Top Products
iMedia Receiver with Video & Mic Input Crestron IM-RXV1-M & IM-RXV3-M
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
1
, CONTROLS
& INDICATORS
DESCRIPTION
12
LAN
3
GREEN
LED
YELLOW
LED
PIN 8
PIN 1
(1) 8-wire RJ-45 with two LED indicators;
10BaseT/100BaseTX Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity.
PIN SIGNAL PIN SIGNAL
1 TX + 5 N/C
2 TX - 6 RC -
3 RC+ 7 N/C
4 N/C 8 N/C
13
COM
COM
Pin 1
Pin 9
(1) DB9 male, bidirectional RS-232 port; Up to 115.2k baud;
hardware and software handshaking support.
PIN DIRECTION DESCRIPTION
1 To IM-RXV1/3-M (DCD) Data Carrier Detect
2 To IM-RXV1/3-M (RXD) Receive Data
3 From IM-RXV1/3-M (TXD) Transmit Data
4 From IM-RXV1/3-M (DTR) Data Terminal Ready
5 Common (GND) Ground
6 From IM-RXV1/3-M (DSR) Data Set Ready
7 From IM-RXV1/3-M (RTS) Request To Send
8 To IM-RXV1/3-M (CTS) Clear To Send
9 To IM-RXV1/3-M (RI) Ring Indicator
14 VIDEO
(1) RCA female, composite video output;
Output impedance: 75 ohms;
Output level: 1 V
p-p
nominal.
15 RGBHV
15
610
1115
(1) DB15HD, female, RGB output; displays RGB signal from RGB
source connected to IM transmitter;
Formats: RGBHV, RGBS, RG
S
B;
Output impedance: 75 ohms;
Sync impedance: 100 ohms;
Maximum output level: 1 V
p-p
maximum;
Sync level: 5 V
p-p
.
PIN FUNCTION PIN FUNCTION
1 Red Video 9 No Connect
2 Green Video 10 Ground
3 Blue Video 11 No Connect
4 Reserved 12 Monitor Sense 1
5 Ground 13 Horizontal Sync
6 Red Ground 14 Vertical Sync
7 Green Ground 15 Monitor Sense 2
8 Blue Ground
(Continued on following page)
10 • iMedia Receiver: IM-RXV1-M & IM-RXV3-M Operations & Installation Guide – DOC. 6593A