Crestron electronic DM-RMC-100 Stereo Receiver User Manual


  Open as PDF
of 2
 
Crestron Electronics, Inc.
15 Volvo Drive
l
Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
l
Fax: 201.767.1903
www.crestron.com
Specifications subject to change without notice. DOC #4765 01/09
All brand names, product names and trademarks are the property of their respective owners.
©2009 Crestron Electronics, Inc.
CCrreessttrroonn DDMM--RRMMCC--110000
DigitalMedia™ Room Controller
Environmental
TTeemmppeerraattuurree::
41° to 104°F (5° to 40°C)
HHuummiiddiittyy::
10% to 90% RH (non-condensing)
Enclosure
CChhaassssiiss::
Steel, black matte powder coat finish
MMoouunnttiinngg::
2-gang, 4" square, or 85mm European electrical box mountable
Dimensions
HHeeiigghhtt::
4.54 in (11.52 cm)
WWiiddtthh::
5.15 in (13.08 cm)
DDeepptthh::
1.41 in (3.58 cm)
Weight
13.8 oz (392 g)
AVAILABLE ACCESSORIES
CCNNSSPP--XXXX
Custom Serial Interface Cable
IIRRPP22
IR Probe
CCNNXXRRMMCCSS
Current Sensor
DDMM--CCBBLL
DigitalMedia™ Cable
DDMM--CCOONNNN
DigitalMedia™ Cable Connector
* For DigitalMedia wiring, use DM-CBL DigitalMedia Cable, CresCAT-D, or quality
CAT5e/CAT6 cable. Do NOT use low-skew cable. The maximum allowable cable
length depends on multiple factors. One or more DM Repeaters (Model DM-DR)
may be required. Refer to the Crestron DigitalMedia Design Guide, Doc. #4789
for complete wiring guidelines.
 previous