Creek Audio STVG-989 Stereo System User Manual


 
TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locate and remedy the problem.
SOLUTION
Insert the power plug into the AC
outlet.
PROBLEM
No power when POWER
is on.
POSSIBLE CAUSE
No power plug connection at
the AC outlet.
Check the outlet with a working
lamp or other electrical appliance.
No power when plugged
in.
The AC outlet may not have
power.
Insert disc correctly.
Wipe clean with soft cloth.
Use a new disc.
Use a new disc.
Only use discs bearing standard
logo as described on page E12.
Disc is inserted upside
down.
Disc is dirty.
Disc is scratched.
Disc is warped.
A nonstandard disc is
inserted.
Moisture has formed inside
the CD deck.
Wait about 20 to 30 minutes to let
it dry out.
CD PLAYER
cannot work normally or
”, “ ” , or “ ” are
displayed.
aai aa aaa
Singing Machine needs to
be reset.
Disconnect the machine from
power source for 30 seconds.
16
Turn up the volume.
No sound.
Volume control is set to
minimum.
Turn up the volume at TV set/PA
system.
Turn on the power at TV set/PA
system.
Volume control on TV set/PA
system is set to minimum.
TV set/PA system power is
OFF.
Select the correct function.
The wrong function is
selected.
No sound from TV/PA.
Ensure white and red patch cords
are securely inserted into both
The Singing Machine and the
TV/PA system.
Patch cords are not secure.