Filter
Top Products
EVOLUTION 2 INTEGRATED AMPLIFIER OPERATING INSTRUCTIONS
SPECIFICATION
POWER OUTPUT (both channels into 8W) 80 Watts
POWER OUTPUT (one channel into 8W) 90 Watts
POWER OUTPUT (one channel into 4W) 145 Watts
PEAK OUTPUT CURRENT INTO 1W > 10 Amps RMS
TOTAL HARMONIC DISTORTION (20 Hz to 20 kHz) < 0.05%
FREQUENCY RESPONSE 5 Hz to 50 kHz - 1 dB
SLEW RATE > 25 V per mS
GAIN x 52
INPUT SENSITIVITY - One channel driven/8W 480 mV line input
PRE-AMP OUTPUT LEVEL Follows input signal level via volume control
SIGNAL TO NOISE RATIO (‘A’ weighted) > 90 dB
SEPARATION (line inputs) > 60 dB at 1 kHz
MM PHONO SENSITIVITY & IMPEDANCE 3.5 mV 47 kW (when fitted)
MC PHONO SENSITIVITY & IMPEDANCE 0.75 mV 1 kW (when fitted)
POWER CONSUMPTION (at idle) 40 W
POWER CONSUMPTION (full power 10% THD) 340 W
WEIGHT (net) 8.6 kgs 19 lbs
SIZE (W x H x D) 430 x 80 x 340 mm 17 x 3.2 x 15.5 ins
MAINS VOLTAGE @ 60Hz 110/120V North America
Mains voltage selector switch on rear panel @ 50Hz 220/240V Europe, Asia and UK
REMOTE HANDSET Creek SRC3
Creek Audio Ltd reserves the right to change or modify the specification of its products without prior warning.
If within two years of purchase date your Creek EVOLUTION proves to be defective for any reason other than
accident, misuse, neglect, unauthorized modification, or fair wear and tear, Creek Audio Ltd. will, at its discretion,
replace the faulty parts without charge for labour or return carriage within the United Kingdom. This warranty is
valid only in the United Kingdom and given in addition to statutory rights. Service enquiries outside the United
Kingdom should be addressed first to the supplying dealer and/or the Creek distributor/importer. Warranties
granted in these countries are entirely at the discretion of the distributor.
CREEK AUDIO LTD
12 Avebury Court, Mark Road, Hemel Hempstead HP2 7TA United Kingdom
Telephone: +44 (0)1442 260146 Fax: +44 (0)870 6220846
E-mail: info@creekaudio.com Internet: www.creekaudio.com
E & O E