Filter
Top Products
PPRROOGGRRAAMMMMEEDD
DDIISSCC
PPLLAAYY
(Remote control only)
This feature allows you to play tracks in your preferred
sequence.
It is not possible to program the CD player while the disc
is playing. So, press the STOP button first, then enter a
program.
ENTERING
A
PROGRAM
To program a desired sequence of tracks:
1. Select the first track using the or numeric 0-
9 buttons. Press the PROG button on the remote
handset. The MEMORY symbol will illuminate and the
track number will be displayed. The first selected
track is now stored in the memory.
2. Select the next track number using the or
numeric buttons. Press the PROG button again - the
second choice is now stored in the memory.
3. Repeat the steps above until all the desired tracks
are stored in the memory.
EXAMPLE
To play track 5, track 2 and track 8 in sequence:
Enter the first choice by selecting track 5 using
the or numeric button. Press the PROG
button to store the first choice. Track is now
stored and the EDIT symbol will be displayed.
The time display will toggle between P: 1 and
the playing time of the selection.
Enter the second choice - track 2 using the
or numeric button. Press the PROG button to
store the second choice. Track is also
stored.
Enter the third choice - track 8 in the same way.
Press the PROG button to store the third choice.
Press the PLAY button. The first programmed track
will start playing and the PROGRAM symbol is
displayed.
LISTENING
TO
A
PROGRAMMED
SEQUENCE
1. Press the PLAY button. The PLAY symbol will
be displayed.
2. The disc will start playing the first programmed track.
NOTE: A maximum of 16 tracks only can be stored
in the PROGRAM memory.
3. After the programmed sequence has finished playing,
the track display and the time display will show the
number of tracks played and the total playing time.
CHANGING
THE
PROGRAM
1. Press the STOP button if the disc is playing.
2. You can modify the program by entering new track
numbers.
CLEARING
THE
MEMORY
1. Press the STOP button twice if the disc is playing.
2. Press OPEN/CLOSE button twice on the front or
DISC button on the handset.
NOTE: The memory will also be cleared if the power is
switched off on the rear panel.
2
5
12
CD53 & CD50 Compact Disc Player