Crate Amplifiers GT-80D Stereo Amplifier User Manual


 
Output Power Rating 80 watts RMS @ 5% THD 8 ohm load, 120 VAC
Gain 88dB, tones @ “5” @ 1kHz
Tone Control Range
Overdrive Channel
Low 24dB range @ 100Hz
Mid 10dB range @ 1kHz
High 20dB range @ 5kHz
Clean Channel
Low 23dB range @ 100Hz
Mid 14dB range @ 800Hz
High 30dB range @ 10kHz
Signal To Noise Ratio
Overdrive Channel
Solid State 61dB
Tube 57dB
Clean Channel
Solid State 81dB
Tube 72dB
Input Impedance 1M ohm
Maximum Signal Accepted 3V peak to peak
Driver Tube Type 12AX7A (1), 12AU7 (2)
Output Device Type MOSFETs
Line Out Level 0.7V RMS nominal
Internal Speaker
Size 12”
Type Crate Custom-L
Magnet 34 oz
Voice Coil 1.75”
RMS Rating 80 watts
Impedance 8 ohms
Power Requirements 115V 60Hz, 100VA
100/115VAC, 50/60Hz, 100VA
230VAC, 50/60Hz, 100VA
Size and Weight 17”H x 21.25”W x 10.75”D, 40 lbs.
GT-80D QuadraDrive
tm
©1997 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
P/N 47-480-01 • 05/97
TECHNICAL SPECIFICATIONS:
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.
The GT-80D is covered with a durable black Tolex
®
material. To keep the cabinet in top condition, wipe it
clean with a damp lint-free cloth to remove dirt and road film. Never spray cleaning agents directly onto
the cabinet, and stay away from abrasive cleansers which could damage the finish.