Filter
Top Products
KXB50 Keyboard Amplifier
KXB50 TECHNICAL SPECIFICATIONS:
Output Power Rating 50 watts RMS @ 2% THD, 8 ohm load – 120 VAC line
Gain 50dB, tones at 12:00 @ 1kHz
Tone Control Range Low: 18dB @ 50Hz
Lo Mid: 21dB @ 150Hz
Hi Mid: 16dB @ 1kHz
High: 29dB @ 10kHz
Input Impedance 10k ohms
Maximum Signal Accepted 10 volts peak to peak
Insert Jack Line Output (Max): 2.5 volts peak to peak
Line Input (Max): 2.5 volts peak to peak
Speaker Size and Rating Crate Custom Design 12” w/ 1.5” voice coil,
30 oz. magnet; power handling 100 watts
Piezo Tweeter; power handling 150 watts
Cabinet Type Port Tuned enclosure
Input Power Requirements 120 VAC, 60Hz, 85VA
100/110 VAC, 50/60Hz, 85VA
230 VAC, 50/60Hz, 85VA
Cabinet Size and Weight 21.5” H x 17.5” W x 15” D, 39.5 lbs.
©2004 SLM ELECTRONICS, A DIVISION OF ST. LOUIS MUSIC, 1400 FERGUSON, ST. LOUIS, MO. U.S.A. 63133
P/N 47-385-01 • 100404
www. crateamps.com
Declaration of Conformity
Manufacturer’s Name: SLM Electronics
Corporate Headquarters: 1901 Congressional Drive, St. Louis, Missouri 63146
Primary Production Facility: 700 Hwy 202 W, Yellville, Arkansas, 72687
Product Type: Audio Amplifier
Products meet the regulations for compliance marking under:
ETL standards UL6500, UL60065, or UL813
CSA standards E60065 or C22.2 No.1-M90
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
C-tick designation Level 2, ABN #56748810738, ARBN# N222
KETI standard K60065 (limited model approval)
Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer
1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.: 314-569-0141, Fax: 314-569-0175