Using the Biamp Capabilities – BX-4115 (con’t):
9
BX-440H / BX-4115
BX-440H / BX-4115 ThunderBass Amplifier
Example 3:
With the BX-4115 for the low end; a
BX-210HP powered cabinet for the
high end:
Plug your bass into the BX-4115, then:
(1) Run a shielded cable from the biamp
low out jack of the BX-4115 to its power
amp in jack. (Connection to the BX-
4115’s speaker is already made through
the factory-installed speaker out cable.)
(2) Run a shielded cable from the biamp
high out jack of the BX-4115 to the input
jack of the BXE-210HP.
Adjust the Crossover Frequency and
Balance controls for the best sound.
0
10
4
6
82
VOLUME
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
TO REDUCE THE RISK OF FIRE OF OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVIS:
WARNING:
CAUTION – HOT!
MODEL
500 WATTS MAX. • 60 Hz • 120 VAC
SERIAL #
MADE IN THE U.S.A. BY SLM ELECTRONICS
1400 FERGUSON AVENUE • ST. LOUIS, MO 63133
BXE-210HP
A
BXE-210HP
BXE-210HP
CAUTION – HOT!
AC
OUTLET
AC LINE IN
POWER
INPUT
0
10
4
6
82
VOLUME
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
TO REDUCE THE RISK OF FIRE OF OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVIS:
WARNING:
CAUTION – HOT!
MODEL
500 WATTS MAX. • 60 Hz • 120 VAC
SERIAL #
MADE IN THE U.S.A. BY SLM ELECTRONICS
1400 FERGUSON AVENUE • ST. LOUIS, MO 63133
100/120VAC: 250V
POWERAMP
OUTPUT
220 WATTS @
4 MIN.LOAD
BXE-210HP
A
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
AVIS:
RISQUE DE CHOC
ELECTRIQUE. NE PAS OUVRIR.
MODEL
SERIAL #
1200W MAX / 120V / 60Hz
BX-440H
CAUTION: CHASSIS SURFACE HOT.
ATTENTION: SURFACIE DE CHASSIS CHAUDE.
AC LINE IN
BX-4115
BX-4115
1
2
from
bass
TO
BX-4115
2
1
INPUT