Using the Biamp Capabilities – BX-440H (con’t):
7
BX-440H / BX-4115
BX-440H / BX-4115 ThunderBass Amplifier
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
AVIS:
RISQUE DE CHOC
ELECTRIQUE. NE PAS OUVRIR.
MODEL
SERIAL #
1200W MAX / 120V / 60Hz
BX-440H
CAUTION: CHASSIS SURFACE HOT.
ATTENTION: SURFACIE DE CHASSIS CHAUDE.
AC LINE IN
300 WATTS MAX
120V 60 Hz
380 W @ 4 OHMS
200 W @ 8 OHMS
SPEAKER
OUTPUTS
380 W @ 4 OHMS
200 W @ 8 OHMS
SPEAKER
OUTPUTS
INPUT
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
SERIAL #MODEL
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
ST. LOUIS, MO 63133
HIGH
OUT
47-146-04
SERIAL #
MODEL:
CRATE BXE-18
POWER HANDLING: 200 WATTS
IMPEDANCE: 8 OHMS
CROSSOVER FREQUENCY: 200Hz
DIRECT
IN
CROSSOVER
INPUTS
BXE-18
BXE-410H
direct
in
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
ST. LOUIS, MO 63133
HIGH
OUT
47-146-04
SERIAL #
MODEL:
CRATE BXE-18
POWER HANDLING: 200 WATTS
IMPEDANCE: 8 OHMS
CROSSOVER FREQUENCY: 200Hz
DIRECT
IN
CROSSOVER
INPUTS
input
2
4
1
3
BX-440H
power
amp
INPUT
from
bass
1
3
BX-440H
power
amp
TO
BXE-410H
TO
BXE-18
2 4
INPUT
0
10
4
6
82
VOLUME
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
TO REDUCE THE RISK OF FIRE OF OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVIS:
WARNING:
CAUTION – HOT!
MODEL
500 WATTS MAX. • 60 Hz • 120 VAC
SERIAL #
MADE IN THE U.S.A. BY SLM ELECTRONICS
1400 FERGUSON AVENUE • ST. LOUIS, MO 63133
BXE-210HP
A
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
AVIS:
RISQUE DE CHOC
ELECTRIQUE. NE PAS OUVRIR.
MODEL
SERIAL #
1200W MAX / 120V / 60Hz
BX-440H
CAUTION: CHASSIS SURFACE HOT.
ATTENTION: SURFACIE DE CHASSIS CHAUDE.
AC LINE IN
BX-440H
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
ST. LOUIS, MO 63133
HIGH
OUT
47-146-04
SERIAL #
MODEL:
CRATE BXE-18
POWER HANDLING: 200 WATTS
IMPEDANCE: 8 OHMS
CROSSOVER FREQUENCY: 200Hz
DIRECT
IN
CROSSOVER
INPUTS
BXE-18
direct
in
2
BXE-210HP
BX-440H
BXE-210HP
CAUTION – HOT!
AC
OUTLET
AC LINE IN
POWER
INPUT
0
10
4
6
82
VOLUME
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
TO REDUCE THE RISK OF FIRE OF OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVIS:
WARNING:
CAUTION – HOT!
MODEL
500 WATTS MAX. • 60 Hz • 120 VAC
SERIAL #
MADE IN THE U.S.A. BY SLM ELECTRONICS
1400 FERGUSON AVENUE • ST. LOUIS, MO 63133
100/120VAC: 250V
POWERAMP
OUTPUT
220 WATTS @
4 MIN.LOAD
BXE-210HP
A
3
1
from
bass
TO
BXE-18
1
3
2
Example 2:
With the BX-440H and a BXE-410H
cabinet for the high end; a mono (or
mono-bridged) power amp and a
BXE-18 cabinet for the low end:
Plug your bass into the BX-440H, then:
(1) Run a shielded cable from the biamp
high out jack of the BX-440H to its power
amp in jack.
(2) Run a speaker cable from the speaker
out jack of the BX-440H to the input jack
of the BXE-410H.
(3) Run a shielded cable from the biamp
low out jack of the BX-440H to the input
jack of the mono power amp.
(4) Run a speaker cable from the speaker
out jack of the mono power amp to the
direct in jack of the BXE-18.
Adjust the Crossover Frequency and
Balance controls for the best sound.
Example 3:
With the BX-440H and a BXE-18
cabinet for the low end; a BX-
210HP powered cabinet for the
high end:
Plug your bass into the BX-440H, then:
(1) Run a shielded cable from the
biamp low out jack of the BX-440H to
its power amp in jack.
(2) Run a speaker cable from the
speaker out jack of the BX-440H to the
input jack of the BXE-18.
(3) Run a shielded cable from the
biamp highout jack of the BX-440H to
the input jack of the BXE-210HP.
Adjust the Crossover Frequency and
Balance controls for the best sound.