Filter
Top Products
WARNING
1. TO PREVENT FIRE OR SHOCK HAZARD.
2. DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.
3. DO NOT REMOVE COVER.
4. PILOT LAMPS SOLDERED IN PLACE.
5. NO USER SERVICEABLE PARTS INSIDE.
6. REFER SERVICING TO QUALIFIED SERVICE PERSONEL.
MAINTENANCE
CLEANING THE TAPE HEADS
Clean the heads frequently to remove dust and tape residue. Dirt on the heads will
impair the sound quality of both recording and playback.
There are two methods for head cleaning
A. The simple method is to use a head-cleaning cassette, available at most audio stores.
Follow the instructions supplied with the closing cassette.
B. The heads can be also cleaned manually.
1. Depress the EJECT button of Tape A and Tape B in order to open the cassette.
2. Depress the PLAY button of Tape A and Tape B.
3. Wipe the heads with a soft not – free cloth or cotton swab that has been
partially soaked in alcohol, until the heads are free of all dirt and residue
deposits.
SPECIFICATIONS
GENERAL
Power Supply : AC 230V ~ 50Hz
AC 110/220V ~ 60/50Hz (Option)
DC 12V = 8 x “D” (UM-1/R-20) size batteries (not included)
Frequency Range: AM 530 - 1710 KHz
FM 88 - 108 MHz
SW 4 - 12 MHz (Option)
Power Consumption: 19 Watts
Output Power: 1.2 Watts RMS per channel x 2
2.5 Watts RMS per channel x 2 (Option)
4.5 Watts RMS per channel x 2 (Option)
Remarks: The manufacturer reserves the right to amend the specification without prior notice.
Version: Rev. 2 (Toshiba IC)