Cobra Electronics CIR 2000 A Radio User Manual


 
11
Chapter 2 Installation
2.1 Installation
NOTE The proper voltage for this system is AC 100V~240V/50-60Hz. Please check
the voltage in your area before plugging in the unit.
2.1.1 LAN Setting
Make sure the internet environment is ready and the network setting is available
(ADSL or Cable Modems is highly recommended).
The default setting of the network in your system is DHCP. (For more network settings
please check 11.4 the ‘Network’ section on page 60)
or
If you want to listen to audio contents from your PC, you can use Cross-over to
connect your system to your PC directly.
2.1.2 Wireless LAN Setting
Make sure the internet environment is ready and the network setting is available.
Plug-in the Wifi Dongle into the USB port on the back of your system (For more settings
please see ‘Network’ section on page 60)