Filter
Top Products
Other Settings
09
53
En
•
OFF
– No conversion between video formats.
3 When you're finished, press
RETURN
.
You return to the Other Setup menu.
Multi-Room and IR receiver setup
• Default setting:
Variable
/
Setting 1
If you’ve made multi-room connections (see
Multi-room
listening
on page 46) you may need to specify your
volume setting. Also use this menu to specify your IR
receiver type (if necessary).
1 Select ‘Multi Room Setup’ from the Other Setup
menu.
2 Select the volume level setting.
•
Variable
– Use this setting if you’ve connected a
power amplifier in the sub room (this receiver is
simply being used as a pre-amp) and you will be
using this receiver’s controls to adjust the volume.
1
•
Fixed
– Use this setting if you’ve connected a fully
integrated amplifier (such as another Pioneer VSX
receiver) in the sub room and want to use that
receiver’s volume controls.
With the
Fixed
setting, the source is sent from this
receiver at maximum volume, so make sure the volume is
quite low in the sub room at first and then experiment to
find the correct level.
3 Select the type of IR receiver you’re using.
•
Setting 1
– Use this setting for all (other) IR
receivers.
2
•
Setting 2
– Use this setting if the IR receiver you’re
using doesn’t seem to work after selecting
Setting 1
.
4 When you're finished, press
RETURN
.
You return to the Other Setup menu.
12 Volt Trigger setup
• Default setting:
OFF
(all components)
After connecting a component the 12 volt trigger (see
Switching components on and off using the 12 volt trigger
on page 48), it switches on automatically when you select
an input function set to switch the trigger on. Specify
which input functions switch on the trigger below.
1 Select ‘12V Trigger Setup’ from the Other Setup
menu.
2 Select an input function and choose the setting
that you want.
This should be the input function, that when selected,
switches on the 12 volt trigger.
•
OFF
– 12 volt trigger is not activated for the selected
component.
•
ON
– 12 volt trigger is activated for the selected
component.
3 Repeat for as many input functions as you would
like to set.
4 When you're finished, press
RETURN
.
You return to the Other Setup menu.
Note
1 If you selected
MR & S
in the
Surround back speaker setting
on page 33, you won’t be able to change the volume level.
2 Some IR receivers may not work with this receiver. Check with your audio dealer for more information.
6. Other Setup
a.DRC Setup
b.Dual Mono Setup
c.LFE ATT Setup
d.SR
+
Setup
e.Video Conv. Setup
f. Multi Room Setup
g.12V Trigger Setup
6f. Multi Room Setup
Volume Level
Variable
IR Setting
[Setting 1]
Be careful of loud
volume when "FIXED"
is selected.
:Finish
6. Other Setup
a.DRC Setup
b.Dual Mono Setup
c.LFE ATT Setup
d.SR
+
Setup
e.Video Conv. Setup
f. Multi Room Setup
g.12V Trigger Setup
6g. 12V Trigger Setup
DVD / LD [ OFF ]
TV / SAT [ OFF ]
DVR1 [ OFF ]
DVR2 [ OFF ]
VIDEO [ OFF ]
TUNER [ OFF ]
CD-R [ OFF ]
CD [ OFF ]
XM [ OFF ]
:Finish
6g. 12V Trigger Setup
DVD / LD [ ON ]
TV / SAT [ OFF ]
DVR1 [ OFF ]
DVR2 [ OFF ]
VIDEO [ OFF ]
TUNER [ OFF ]
CD-R [ OFF ]
CD [ OFF ]
XM [ OFF ]
:Finish
VSX-80TXV_KU.book.fm 53 ページ ２００６年３月１４日 火曜日 午後６時６分