Classe Audio CA-M400 Stereo Amplifier User Manual


 
23
ENGLISH
Specifications
Classé Audio reserves the right to make improvements without notice.
Power output 400W continuous rms @ 8Ω
800W continuous rms @ 4
Ω
Frequency response 10Hz – 22kHz (+0/-0.1dB)
10Hz – 155kHz (+0/-3.0dB)
Phase better than -10° @ 22kHz
Signal-to-noise ratio 112dB
(ref. full output, 10Hz – 80kHz)
Noise floor (FFT) all peaks less than -95dBV
(10Hz – 80kHz)
Distortion (THD + noise) 0.003% @ 8Ω
(unweighted, 1.0Vrms/1kHz input, 10Hz – 500kHz)
Voltage gain 29.1dB
Sensitivity 2.0Vrms for rated output @ 8Ω
Input Impedance 100kΩ
Rated power consumption (as per IEC60065 para. 2.3.10) 480W
Idle power consumption 166W
Mains voltage specified on rear panel decal
(cannot be changed by user or dealer)
Dimensions (not incl. controls or connectors) Width: 17.5” (445mm)
Height: 8.75” (222mm)
Depth: 18.5” (470mm)
Shipping weight 94lbs (43kg)
Net weight 82lbs (37kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command
is a trademark of Equity International, Inc. All rights reserved.
AMX
®
is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron
is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.