Filter
Top Products
7
custom installations Drawings are included in this manual to facilitate special installations and
custom cabinetry (see the section Dimensions). An optional, purpose-designed
rack mount kit is available for this product. Contact your Classé dealer for more
information.
serial number e serial number for your power amplifi er is found on the rear of the unit.
Please note and record this number on the page entitled Important Safety
Instructions for your future reference.
register your purchase! Having found the serial number, now would be a good time to fi ll out the
registration card. Please register your purchase so we can advise you of updates
and other items of interest.
It will take only a minute or so. Please complete the card now, before you forget.
operating voltage e CA-2200 power amplifi er is set at the factory (internally) for 100V, 120V,
220V, 230V, or 240V AC mains operation, as appropriate for the country in
which it is to be sold (230V only in European Union countries, in compliance with
CE regulations). e voltage setting may not be changed by the user or dealer.
Make sure that the label on the rear panel of your power amplifi er indicates
the correct AC operating voltage for your location. Attempting to operate your
power amplifi er at an incorrect voltage may damage the unit.
Warning: The voltage setting of your power amplifier may not be
changed by the user. There are no user-serviceable parts
within the unit. Please refer any problems to an authorized
Classé service center.
If the AC mains voltage indicated on your power amplifi er is incorrect, please
contact your local, authorized Classé dealer or distributor.
e CA-2200 can easily be powered by a normal 15-ampere AC mains line. If
other devices are also powered from the same AC line, their additional power
consumption should be taken into account.