Filter
Top Products
English
32 DXZ856MP
280-8224-00
Setting the beep for when
buttons are operated (BEEP)
The short or long high-pitched tone you hear
when a button is operated is called a “BEEP”.
• The factory default setting is “ON”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select “BEEP”.
RTN
BEEP
OFF
ADJ
APPEARANCE
4. Touch on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
Adjusting the title scroll
speed (SCROLL SPD)
This feature allows you to slow down the scroll
speed when the scroll speed is too fast, making
it difficult to view the screen.
• The factory default setting is “SPEED 1”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch on the left of the display to
select “SCROLL SPD”.
RTN
SCROLL SPD
1
ADJ
APPEARANCE
4. Touch on the right of the display to
adjust the sensitivity.
∗ This setting item can be adjusted within
the range SPEED 1 to SPEED 4.
5. Press the [ADJ] button to return to the
original mode.
Setting the source icon
(SRC ICON)
You can change the source icon on the display.
• The factory default setting is “ICON”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch on the left of the display to
select “SRC ICON”.
RTN
SRC
I CONI CON
ADJ
APPEARANCE
4. Touch on the right of the display to
select “ICON” or “SPE/ANA”.
5. Press the [ADJ] button to return to the
original mode.
Setting speaker ON/OFF
(SUB-WOOFER)
Set the sub-woofer (SUB-WOOFER) ON/OFF.
Be sure to set this setting to “OFF” when there
is no sub-woofer.
• The factory default setting is “ON”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SOUND].
3. Touch on the right of the display to
select "ON" or "OFF".
RTN
SUB
ON
WOOFER
ADJ
SOUND
4. Press the [ADJ] button to return to the
original mode.
Setting internal amplifier use
ON/OFF (AMP CANCEL)
Set internal amplifier use ON/OFF matched to
whether or not an external amplifier is used.
Set AMP CANCEL to “ON” (internal amplifier
use OFF) when an external amplifier is
connected and the internal amplifier is not used.
• The factory default setting is “OFF” (internal
amplifier used).
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SOUND].
Common Operations
+DXZ856MP_01-24-Eng.p65 1/27/05, 7:13 PM32