Filter
Top Products
10 DXZ556MP
280-8168-00
English
6. REMOTE CONTROL
C
R
2
0
2
5
[
SRC
]
[
BND
]
[
]
[
], [ ]
[
MUTE
]
[
ISR
]
[
SCN
]
[
a
], [
d
]
[
DISP
]
[
RDM
]
[
RPT
]
Inserting the Battery
1 Turn over the remote control unit and slide the cover
in the direction indicated by the arrow in the
illustration.
2 Insert the battery (CR2025) into the insertion guides,
with the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
4 Replace the cover and slide in until it clicks into place.
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or
damage to surrounding materials. Always follow these
safety precautions:
• Use only the designated battery.
• When replacing the battery, insert properly, with +/–
polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
Insertion guide
Signal transmitter
+DXZ556MP-009-ENG 04.12.16, 9:06 AM10