Filter
Top Products
Satellite Radio Operations
English
25
DXZ275MP/DXZ375MP
Preset memory
1. Press the [
BND
] button to select the desired
band.
2. Select the desired channel with quick tuning
or step tuning.
3. Press and hold the [
DIRECT
] button for 2
second or longer to store the current channel
into preset memory.
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Press and hold the [
BND
] button for 1
second or longer to select the category
selection mode.
∗
It press once again, return to the channel
selection mode.
2. Press the [
w
] or [
z
] button to change the
category item.
3. Press the [
x
] or [
v
] button to tune in a
station.
Note:
• When the category selection mode is entered, the
category of the last received channel is displayed
first.
• The category selection mode is canceled when
no channel with the selected category can be
found.
• The [
x
] or [
v
] button are not pressed within 7
seconds, the category selection mode is
canceled, and resumes to the channel mode.
Presetting a category
A category can be preset by registering specific
categories in [
DIRECT
] buttons 1 to 6. Then the
desired category can be recalled by pressing
the corresponding [
DIRECT
] button.
1. Press and hold the [
BND
] button for 1
second or longer to enter the category mode.
2. Press the [
w
] or [
z
] button to select a
category.
3. Press and hold one of the [
DIRECT
] buttons
for 2 seconds or longer to store the current
category into preset memory.
Notes:
• When the name of a channel stored in memory is
changed by a broadcasting channel, the display
may show a channel name that differs from the
stored name.
•A channel stored in memory may be discontinued
at the option of the broadcasting channel.
• If no operation is performed for more than 1
second, category seek tuning can automatically
tune in a receivable broadcast channel category.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
●
Category scanning
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Press and hold the [
BND
] button for 1
second or longer to select the channel mode.
2. Press the [ ] button to select the category
scan mode. And start the category scanning.
Note:
• Category scanning is not available when no
category is defined for the current channel.
●
Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Press and hold the [
BND
] button for 1
second or longer to select the channel mode.
2. Press and hold the [ ] button for 1 second
or longer to select the preset scan mode.
And start the preset scanning.
DXZ375MP_EN.book 25 ページ ２００６年１１月１０日 金曜日 午後１時１５分