Clarion DXZ275MP CD Player User Manual


 
English
24
DXZ275MP/DXZ375MP
Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
XM Satellite Radio Receiver: XMD1000
XM Smart Digital Adapter: XM SDA
SIRIUS Satellite Radio Receiver: SIRCL2,
SIRCL3
Note:
When the function is differ depending to the
connected receiver, they are distinguished by the
following notations:
“XM”: for an XM Satellite Radio Receiver
“SIRIUS”: for a SIRIUS Satellite Radio Receiver
Selecting a Satellite Radio mode
1. Press the [
SRC
] button.
The system changes to the specified
Satellite Radio mode.
Selecting a band
1. Press the [
BND
] button to select a band.
This changes the reception band as follows:
XM:
XM1
XM2
XM3
XM1 ...
SIRIUS:
SR1
SR2
SR3
SR1 ...
Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
When the receiver is turned on the first time
or after a reset: “
UPDATING
When a channel is being tuned in (no signal is
yet received):
XM: “
LOADING
”, SIRIUS: “
LINKING
•A channel without a broadcast has been
selected:
XM: “
– – – CH
”, SIRIUS: “
INVLD CH
•A channel not covered by your contract:
XM: “
UPDATING
”, SIRIUS: “
CALL 888
539-SIRI
” (alternated)
Confirming your SIRIUS ID
1. Press and hold the [
D
] button for 1 second or
longer to display the ADJUST item.
2. Press the [
x
] or [
v
] button to select “
SID
DISP
”.
3. Press the [ ] button, the display will
display the upper 6 digits.
4. Press the [
w
] or [
z
] button to switch
between the display for the upper 6 digits
and lower 6 digits.
5. To return to the previous mode, press the [
D
]
button.
Displaying channel labels
1. Press the [
D
] button to select the desired
channel label.
Channel
Category
Title
Artist
Radio text
Channel...
Channel selection
1. Channels are selected with the [
x
] or
[
v] button.
For details, see the following operation
descriptions.
Note:
The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
Quick tuning
1. Press and hold the [x] or [v] button for
1 second or longer.
Step tuning
1. Press the [x] or [v] button.
Recalling a preset station
A total of 18 satellite radio stations can be
stored.
XM: 6-XM1, 6-XM2 and 6-XM3
SIRIUS: 6-SR1, 6-SR2 and 6-SR3
This allows you to store your favorite satellite
radio stations in memory for later recall.
1. Press the [BND] button to select the desired
band.
2. Press the [w] / [z] button or [DIRECT]
button to select the desired preset station.
DXZ375MP_EN.book 24 ページ 2006年11月10日 金曜日 午後1時15分