Filter
Top Products
12
English
DB255
Radio Mode Operations
FM reception
For enhanced FM performance the
tuner includes signal actuated stereo control and
multipath noise reduction circuits.
Auto store function
(
Automatic Station Store
)
1. Press
[
BND
]
button to select the desired band
FM1, FM2, FM3 or AM.
2. Press and hold the
[
]
button for 1 second
or longer. The stations at which the reception
is the strongest will be automatically stored in
the memory.
Listening to the radio
1. Press the
[
SRC
]
button and select the radio
mode. then the radio will be on.
2. To select a preset band, press the
[
BND
]
but-
ton, then select one of the preset bands such
as
FM1, FM2, FM3 or AM. Every time the
[
BND
]
button is pressed, the display will change as:
F1
ÆÆ
ÆÆ
ÆF2
ÆÆ
ÆÆ
ÆF3
ÆÆ
ÆÆ
ÆAM
ÆÆ
ÆÆ
ÆF1...
3. Press the
[ ]
or
[ ]
button to tune in the
desired station.
Manual tuning
1. Press
the
[
BND
]
button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the
[
BND
]
button for 1 second
or longer, then the "
MANU" is lit in the display,
which means that a manual selection function
is on.
3. Press the
[ ]
or
[ ]
button to manually tune
in a station.
Seek tuning
1. Press
the
[
BND
]
button to select the desired
band FM1, FM2, FM3 or AM.
2. If the "MANU" is lit in the display, press and
hold the
[
BND
]
button for 1 second or longer.
When the "MANU"
display is off, the seek tun-
ing is now available.
3. Press the
[ ]
or
[ ]
button to automatically
seek in a station.
Preset memory function
Preset memory function can store up to 24 sta-
tions: six stations for each of FM1, FM2, FM3 and
AM.
Manual memory function
1. Press the
[
BND
]
button, to select a band you
want to store in the memory.
2. Press the
[ ]
or
[ ]
button to tune into a
desired station.
3. Press and hold one of the
[
DIRECT
]
button for
2 seconds or longer to store the current sta-
tion into preset memory.
Notes:
• When the auto store is performed, the station pre-
viously store in the memory at that position is over-
written.
• When the number of stations stored is less than
six, the previous content of the memory for each
direct button will be retained.
Preset scanning
(
Preset Station Scan
)
When the
[ ]
button is pressed, the "SCN" will
be indicated with preset memory numbers and the
stations are tuned in for 7 seconds each in the
order in which they were stored. Press the
[ ]
button again to cancel the preset scanning mode.
Instant station recall (
ISR
)
With this function, a specific radio station can be
recalled from any mode.
ISR memory
1. Press the
[
SRC
]
button, then select the radio
mode.
2. Select the radio station which you want to store
in the memory.
3. Press and hold the
[
ISR
]
button for 2 seconds
or longer.
Recalling ISR
Press the
[
ISR
]
button and the display will show
"ISR". Then the radio station previously memo-
rized will be selected. Press the
[
ISR
]
button again
to disengage the unit from the Recalling ISR func-
tion.