Cisco Systems DX40 Stereo System User Manual


 
9
Upgrade
Upgrade your radio using a PC connected to the USB socket. Upgrades may be issued to
provide enhanced functions or improve performance. The version number of your radio is
displayed on the top line.
Register your product and include an e-mail address to receive notification of product
upgrades or visit our website at www.pure.com/support.
To upgrade, select the Upgrade option and follow the instructions provided with the upgrade.
To exit the upgrade menu press the Menu button.
Hints and Tips
I don’t see any Intellitext
This could be because you haven’t tuned to a participating station or the station hasn’t
broadcast any Intellitext since you tuned in. Try tuning to a participating station (e.g. in the UK try
talkSPORT), wait and then check again.
(<<) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. A secondary service has a ‘<<’ before its name in the
station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations are those which appear on the station list but are not currently
available. Inactive stations have a ‘?’ before their name on the station list. If you select a station
which has this symbol, your radio tries to tune in or returns to the previous station.
Display says ‘No stations available’
Check that your aerial is fully extended. Use Autotune to search for stations. Try adjusting your
aerial or radio position.
Display says ‘Disabling alarms’ when I switch off
When on battery power, any alarms you set will not work if the unit is switched off.
Resetting your radio
Resetting your radio removes all presets, stored stations and favourite station settings and resets
all options to defaults. To reset:
1. Press and hold the Menu button for three seconds.
2. Press Select to confirm the reset or press no buttons to cancel the reset.