Filter
Top Products
InstallAdvantage IA-400D Amp manual
w ww. c hr ys al i sa c ou s ti c s. c om
15
SP ECI FIC AT ION S
Specifications IA-IWS1 (In-Wall Subwoofer)
Woofer:
Two 6.5" active drivers
Two 12.5" x 3" passive radiators
Frequency Response:
Overall 23-250 Hz
(+/-3dB) 34-180 Hz
Harmonic Distortion: <5% (typical)
Magnet Structure:
Voice Coil: 2” 4-layer copper coil
Dimensions (H/W/D):
(inc. feet & flange)
18.6" x 16.5" x 4.3"
(47.2 x 42 x 11 cm)
**excludes grilles, mounting tabs, etc.
Cabinet:
Passive radiator design
Warranty:
(parts/labor)
22 lbs. (9 Kg)
Specification IA-400D Subwoofer Amplifier
Amplifier:
(Class D)
400 watts Dynamic
200 watts RMS Power
High Pass Crossover: 80Hz (6 dB/octave)
Low Pass Crossover: 30Hz-160Hz, Defeatable,
24 dB/octave slope
Inputs: Line and Speaker Level
Outputs: Line-level throughput, speaker level:
80 Hz up (subwoofer out)
Phase: 0°, 90°, 180°, 270°
Dimensions (H/W/D):
(inc. feet & grille)
3.6" x 17.0 " x 13.0"
(9 x 43.2 x 33 cm)
**Allow two extra inches in depth for wire
connectors and power cable.
**Includes feet. Feet can be removed for
rack mount use. Unit is approximately
“two rack units” high.
Warranty:
(parts/labor)
Shipping Weight:
(approx.)
25 lbs. (22.7 Kg)
The following subwoofer is designed to work with the IA-400D amplifier:
Shipping Weight:
(approx.)
64 oz (4 lbs) each
active / 128 oz (8 lbs) total
Three years (electronics)
Five years (drivers)
Grille: 16.25" H x 14" W
Cut-out Dimensions:
16.67" H x 14.5" W