Filter
Top Products
RE AR PA NEL CO NNE CTIO NS — D ETA ILED E XPL ANATION
InstallAdvantage IA-400D Amp manual
w ww. c hr ys al i sa c ou s ti c s. c om
8
The IA-400D amplifier is equipped with both speaker-level and line-level inputs. Use the RCA/Phono type “INPUT” jacks when
connecting from a pre-amp, signal processor, or line-level crossover. The “SPEAKER LEVEL INPUT” jacks connect directly to the
speaker outputs of an integrated amplifier or receiver. Your amplifier section will notice no additional loading effects when you use
these inputs because of their high impedance.
Note: Do not use both the RCA/Phono “INPUT” connections and “SPEAKER LEVEL INPUT” connections simultaneously.
About Low-P ass C rossove rs
All of the IA-400D amplifier inputs sum the left and right channels together and the resulting signal is passed through an adjustable low-
pass crossover before being amplified. The crossover control allows you to adjust the upper limit of the subwoofer’s frequency response
from 30 to 160 Hz. The subwoofer’s response will begin rolling off above the frequency you set this control to. The slope is 24 dB/octave.
You should set the crossover frequency to obtain a smooth and seamless transition from the subwoofer to the main speakers in your
system. If your main speakers are small with limited low frequency output, you may wish to choose a higher frequency (such as 100-120
Hz) than you would with larger speakers which have greater low frequency output. The IA-400D amp’s crossover has a default of 80 Hz.
Most receivers and processors provide a menu option in which you can characterize main speakers as “large” or “small” speakers. This
affects the bass signals passed to the main speakers. We recommend in most cases setting the main speakers to “small,” despite their size
and frequency response characteristics, allowing all multi-channel base and LFE signals to be passed to the IA-400D. This is because
the powerful 400 watt IA-400D amp combined with the IA-IWS1 subwoofer you have purchased are more likely suited to low bass
reproduction than your amp and main speakers. With the burden of low frequency reproduction relieved, your speakers will exhibit
better performance, and your overall system performance will improve.
Disabl in g the Low-Pas s Crossover (Subw oo fer Dire ct )
If your receiver/processor provides a crossed-over signal to the subwoofer, you may want to bypass off the IA-400D amp’s low-pass
crossover. To do this, depress BOTH the Crossover UP and Crossover DOWN buttons simultaneously. The numeric LED will
show indicating that the low-pass crossover has been defeated. To reactivate the low-pass crossover, simply push the crossover
UP or crossover DOWN buttons.
A Wo rd About Your Home Theater Receive r’s Cros sov er
and the IA-400D Amplif ie r’s Cross ov er
Your Chrysalis IA-400D amplifier is designed to operate using the full range audio signal for input when using the built-in crossover.
Many home theater processors/receivers have a “subwoofer out” jack that performs this same function and are designed to be used
with a powered subwoofer.
--