Filter
Top Products
Cerwin-Vega! TS-42 Folded Horn
4. INPUT CONFIGURATION: DAISY CHAINING SPEAKERS
Since all Cerwin-Vega! Folded Horns are equipped with a pair of Speakons connectors (that are parallel inputs);
it is possible to daisy-chain speakers by connecting the output of the powered amplifier to one input, then daisy
chaining to a second speaker.
Since each folded horn is an 8 ohm load, daisy chaining two folded horns would provide a 4 ohm load.
Caution If you daisy chain two folded horns make sure that you double your amplifier power and use an amplifier
that will handle a 4 ohm load. Because of the current limitations of the Neutrik Speakon connectors it is not
recommended to daisy chain more than two TS-42 folded horns.
5. SPECIFICATIONS
Cerwin-Vega! TS-42 Folded Horn
Frequency Response
(-3 dB) 35 Hz – 215 Hz
(-10 dB) 33 Hz – 230 Hz
Sensitivity @ 1w / 1 Meter 108 dB
Power Capacity 1000 w (RMS), 2000 w (Peak)
Recommend Amplifier Power 1500 w - 2000 w @ 8 ohms
Maximum SPL 144 dB
Input Connectors (2) Neutrik Speakon
Voice Coil Diameter
4”
Nominal Impedance 8 ohms
Weight
228.5 lbs
103.6 kg
Dimensions (H x W x D)
42.5” x 24” x 45.3"
108 cm x 61.07 cm x 115 cm
3