Cerwin-Vega CVP-1152 Speaker User Manual


 
11
Cerwin-Vega! CVP-2153 & CVP-1152 Loudspeaker Systems
10. SUSPENSION OF THE CVP SERIES
Remove the fly bracket screws in the fly points where you want to install M10 eye bolts. Screw in the M10 eye
bolts being careful not to strip the fly bracket screw insert point. Do not remove fly bracket screws from areas
where you will not install eye bolts insure that either an eye bolt or a fly bracket screw is installed in all fly
bracket screw insert locations.
De-rating
Using the mounting points at an angle will de-rate the WLL (Working Load Limit) for each mounting point. Each
point mounted at an angle should be de-rated according to the following formula.
- WLL = cosine (angle) x 500
- Where: angle = degrees form vertical pull
500 = WLL for each CVP mounting point @ vertical pull
11. SPECIFICATIONS
Cerwin-Vega! Loudspeaker Systems
CVP-1152 CVP-2153
Frequency Range -10 dB 50 Hz - 20 kHz 37 Hz - 20 kHz
Frequency Response -3 dB 59 Hz - 18.5 kHz 48 Hz - 18.5 kHz
Sensitivity @ 1w / 1 Meter 99 dB 101 dB
Power Capacity RMS / PK 500 / 1000 w 1000 / 2000 w
Recommend Amplifier Power 750 w - 1000 w 1500 w - 2000 w
Maximum SPL 130 dB 134 dB
Coverage Pattern 60 x 40 rotatable 60 x 40 rotatable
HF Diaphragm Size 1.75” 1.75”
Weight 66.5 lbs 112.5 lbs
Fly Points Yes Yes
Bi Amp use Yes Yes
Rotatable Horn Yes Yes
HF Protection Fast Reacting Suppression Limiter
Woofer Ceramic 3” VC
Construction Multi-ply Hardwood
Finish Polyurethane Paint