Cerwin-Vega CVA-121 Speaker User Manual


 
BEFORE YOU BEGIN
T
he Cerwin-Vega! subwoofers covered by this manual are designed for portable applications in which the speakers will be
stacked directly on the floor, stage, a solid, stable platform, mounted on a tripod stand or pole-mount. Cerwin-Vega! does not
support suspension of the subwoofer models covered by this manual nor are these models intended for fixed installation in
outdoor or high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical
contacts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct sunlight. The driver
suspension will prematurely dry out and finished surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light.
Cerwin-Vega! subwoofers can generate considerable energy. When placed on a slippery surface such as polished wood or
linoleum, the speaker may move due to its acoustical energy output. Precautions should be taken to assure that the speaker does
n
ot fall off a stage or table on which it is placed.
Some Cerwin-Vega! subwoofers include a receptacle cup to allow mounting of a satellite speaker on top of the subwoofer using
a standard speaker pole shaft. When using a standard speaker pole shaft, be sure to observe the following precautions:
o Check the speaker pole shaft for specification to be certain it is designed to support the weight of the speaker.
o Observe all safety precautions specified by the speaker pole shaft manufacturer.
o Always verify that the subwoofer is placed on a flat, level, and stable surface
o Route cables so that performers, production crew, and audience will not trip over them, toppling the speaker.
o Always be cautious in windy, outdoor conditions as the stability of the entire system may be compromised.
Cerwin-Vega! subwoofers are easily capable of generating sound pressure levels (SPL) sufficient to cause permanent hearing
damage to performers, production crew and audience members. Caution should be taken to avoid prolonged exposure to SPL in
excess of 90 dB.
Built-in Amplifier Precautions
Do not attempt to service this unit beyond instructions contained in this manual. Refer all servicing to a Cerwin-Vega!/Stanton
Authorized Service Center. Servicing is required when the apparatus has been damaged in any way, such as power-supply input
connector is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped. Keep your Cerwin-Vega! subwoofer amplifier module away from
sources of heat, such as a radiator or oven. Do not cover or surround your Cerwin-Vega! subwoofer amplifier module with mate-
rial that may retain heat, such as a blanket or curtain. Be certain that the vents on the panel of the amplifier module are clear of
all obstructions during operation.
Warning
Shock Hazard: To reduce risk of fire or electric shock, do not expose this unit to rain or moisture. Do not immerse your
Cerwin-Vega! subwoofer amplifier module in any liquid. Do not operate your Cerwin-Vega! subwoofer near a pool, bathtub or
other standing water. Do not bypass or defeat the grounding or polarization means used on the Cerwin-Vega! subwoofer
amplifier module. Make sure all blades on the polarized power plug can be fully inserted into the receptacle or other outlet that
will be used with the unit. Your Cerwin-Vega! subwoofer amplifier module should be cleaned only with a dry cloth. Take care of
the power cord attached to your Cerwin-Vega! subwoofer amplifier module. Avoid situations where your cord might be stretched,
pinched, or otherwise abused. Route it to avoid foot traffic. Pay special attention to the cord connector and attachment points.
CERWIN-VEGA! PROFESSIONAL ACTIVE SERIES
5