Filter
Top Products
USER’S GUIDE IQ-18W
2
REPLACING THE BATTERY
Low battery power is indicated when timekeeping slows or stops completely. Should either of these symptoms
occur, replace the battery immediately. Do not leave a low or dead battery in the clock.
To replace the battery
1. Remove the battery cover.
• Rotate the battery cover so its
mark moves from CLOSE to OPEN.
2. Remove the old battery.
3. Load a new battery, making sure that its positive (+) and negative (–) ends are facing correctly.
• Loading a battery incorrectly can cause it to burst and damage the clock.
4. Replace the cover.
• Place the battery cover onto the clock so its
mark is initially aligned with OPEN. Next, rotate the cover so
the
mark moves from OPEN to CLOSE.
• The battery cover can fall off or water can get into the clock if the cover’s
mark is not pointed at CLOSE.
• Dirt or dust on the battery compartment gasket can allow water to get into the clock. Use a soft, dry cloth to
wipe the gasket clean before replacing the battery cover.
Battery precautions
• Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician
immediately.
• Be sure to load the battery with its positive (+) and negative (–) ends facing correctly.
• Never charge the battery that comes with the clock.
• Should a battery ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
• Replace the battery at least once a year, even if the current battery is working normally.
• The battery that comes with the clock loses some power during transport and storage.
To open
Battery cover
mark
Gasket
CLOSE
OPEN