Filter
Top Products
Cary Audio Design SLP-88 Preamplifier Operations Manual
- 3 -
SPECIFICATIONS: SLP-88
Dimensions: 16” W x 5” H x 12” D
Weight: 15 lb..
Circuit: Class A Triode
Input Impedance: 100,000 (100K) ohms resistive
Output Impedance: 680 ohms
Gain: 20 dB
Signal/Noise Level: -88 dB
Resistors: 1 % metal film
Capacitors: Film and foil output caps, 5 micro farad (5 mFd)
Power Transformer: 200% continuous commercial duty cycle
Tubes: 2- 6SN7 dual triodes
Power Supply: Full wave rectification, center-tapped, pi-network with filter choke, fully
regulated
AC
Power Requirements: 100 – 130 volts AC / 50-60 Hz at 24 watts
200 – 245 volts AC / 50-60 Hz at 24 watts
Wire: EE Teflon Silver
Warm-up Time: 5 minutes (2 minute auto mute)
Input and
Output Jacks: Gold plated with Teflon inserts
Duty Cycle: Continuous duty 24 hours per day
This section describes the basic specifications of the SLP-88 at the time of printing. Specifications are
subject to change or improvement without notice or obligation.