Cary Audio Design CAD 300 SEI Stereo Amplifier User Manual


 
SPECIFICATIONS
This section describes the basic specifications of the CAD 300 SEI at the time of printing. Specifications
are subject to change without notice or obligation. When the following cautionary terms are used in this
manual, these definitions apply:
WARNING
Electrical hazard! Misuse or failure to follow instructions properly may
result in personal injury or death!
CAUTION
No risk or personal injury; however, misuse or failure to follow instructions
may result in damage to equipment.
NOTE
No risk of personal injury or equipment damage; however, misuse or failure
to follow instructions may prevent proper performance of the equipment.
............................................................................................................................................................
CIRCUIT TYPE Single-ended, Class A
............................................................................................................................................................
INPUTS CD, AUX 1, AUX2
............................................................................................................................................................
POWER OUTPUT 4/8 ohms = 15 watts/CH
............................................................................................................................................................
S/N 90dB below rated power output
............................................................................................................................................................
FREQUENCY RESPONSE 23 20,000 Hz (+0 0.75dB)
............................................................................................................................................................
HEADPHONE OUTPUT 4-50 ohm compatible ¼” 3 circuit jack
............................................................................................................................................................
POWER TRANSFORMERS 1 - EI laminated, 200% duty cycle
............................................................................................................................................................
OUTPUT TRANSFORMERS 200% duty cycle
Air gapped, wound with OFC copper wire, wax impregnated
............................................................................................................................................................
RESISTORS 1% metal film
............................................................................................................................................................
WIRE Silver double “E” teflon
............................................................................................................................................................
COUPLING CAPS Oil filled
............................................................................................................................................................
POWER SUPPLY CAPACITORS 2 1200mfd @ 450 VDC, Total 2400 MFD 230 Joules
............................................................................................................................................................
WIRING Point - to - point
............................................................................................................................................................
LINE INPUT 3 switchable selections
............................................................................................................................................................
SPEAKER POSTS 5-way Copper
............................................................................................................................................................
TUBE SOCKETS Ceramic with silver pins
............................................................................................................................................................
ADDITIONAL FEATURES Soft shoe feet
Detachable power cord
6