Filter
Top Products
CONTROLS AND DISPLAYS
FRONT PANEL
CAT EYE TUBE Indicates approximate power output level. When the eye is
completely closed the amplifier is at full power output.
TOP PANEL
OFF-ON TOGGLE SWITCH Turns AC power on in the rear position. The output tube will not
light at this point.
STANDBY SWITCH Turns the filament of the output tube on in the rear position.
TUBE SELECTOR SWITCH Set either to 211 or 845 before installing selected output tube.
FEEDBACK LEVEL Adjusts the level of feedback from 0 to 10 dB
REAR PANEL
INPUT Signal input connection via shielded RCA interconnect cable
OUTPUT Three 5-way binding posts provide output to the speaker system
(4, 8 or 16 ohm connections).
FUSE AC power fuse. Never replace with any other value than 3 AMP
SLOW BLOW FUSE! 250 VOLT!
TUBE FUSE Never replace with any other fuse than ¼ amp FAST BLOW
FUSE!
7