Filter
Top Products
Customizing Your C 306
SETUP OVERVIEW:
The C 306 Preamplifier has many provisions for custom-tailoring the system's
operation to match your preferences. The method for modifying any of these
settings is to:
* press the SETUP button on either the front panel or the remote control
to enter the setup mode, accessing the C 306 menu system:
* navigate among different menu items using SELECT knob or the remote
control's NAVIGATE buttons;
* change the value of the selected menu item using either the VOLUME
knob or NAVIGATE buttons on the remote.
* move up or down a level within a menu, or save the change by pressing
ENTER on either the front panel or the remote control.(You can avoid
saving an unwanted change by leaving the menu without pressing ENTER,
by pressing SETUP instead.)
This four-step process gives you extensive control over a wide variety of
setup options, and provides positive feedback that your changes have been
accepted and saved for future use.
THE MENU SYSTEM:
The complete C 306 Setup menu is shown below for your reference:
CHANNEL 1 RENAME
CHANNEL 2 RENAME
CHANNEL 3 RENAME
CHANNEL 4 RENAME
CHANNEL 5 RENAME
CHANNEL 6 RENAME
MUTE LEVEL-----------> Vol. off ---> Vol. 1---> Vol. 2 ---> Vol.3
VOLUME MODE--------> COMMON ---> INDIVIDUAL
LOAD DEFAULT
EXIT MENU
The C 306's extensive menu system allows you to customize the way the
preamplifier operates, to better suit the needs of your system and your
personal preferences. We will review the following information in more
detail in the coming pages, on an item-by-item basis.
3.1
3.2
3.3
RENAME:
To facilitate operation in complex multisource systems, the C 306 is capable of
displaying a wide variety of names for each of its six inputs. The available names
are listed below.
CHANNEL 1-6
CD Player 1-3
Surround Processor 1-3