Open as PDF
Serial Number Label Removed
Manufactured in an
ISO9001 approved facility
Class 1 Laser Product
Luokan 1 Laserplaite
Klass 1 Laserapparat
Made under licence in China
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference; 2) This device must accept any interference,
including interference that may cause undesired operation.
S/P DIF Co-axial
Mains Voltage Selector Switch
Rated Power Consumption: 15W
Designed and engineered in London, England
Topaz CD10 Compact Disc Player
Rear panel connections
S/P DIF co-axial digital output (CD10 only)
For input to a separate DAC, such as Cambridge Audio DacMagic*, or
digital recording machine. To obtain best results, use a high quality
75ohm digital RCA interconnect cable (not one designed for normal audio
* For more information, see the DacMagic page on the Cambridge Audio
Use good quality interconnect cables from these sockets to any line level
input on your amplifier. For best results and matched performance, we
recommend connection to a Cambridge Audio amplifier.
AC power socket
Once you have completed all connections to the amplifier, plug the AC
power cable into an appropriate mains socket and turn the unit on. Your
compact disc player is now ready for use.
Front Panel controls
Switches the unit on and off.
Receives IR commands from the supplied remote control. An
unobstructed line of sight between the remote control and the sensor is
Alpha-numeric characters which display playback information. On
inserting a disc, the CD player will take a few seconds to read the Table of
Contents (TOC) information from the disc. The display will then show the
number of tracks on the CD and the total length of the CD.
1 42 5
Allows you to open and close the disc tray. After placing a CD in the tray,
press Open/Close to close the tray.
Plays the disc and pauses play.
Stops the CD playing.
Enables you to skip between and search within tracks. Press briefly to skip
a track. Press and hold to scan through a track.