Califone HPK Headphones User Manual


  Open as PDF
of 2
 
Model HPK-series Headphones/
Headsets
Thank you for purchasing the Califone
®
HPK-series Headphones/
Headsets.
We encourage you to visit our website www.califone.com to register
your product for its warranty coverage, sign up to receive our newsletter,
download our catalog, and learn more about the complete line of
Califone
®
audio visual products, including portable and installed wireless
PA systems, multimedia players and recorders, headphones and
headsets, computer peripheral equipment, visual presentation products
and language learning materials.
1. IMPORTANT SAFETY INSTRUCTIONS
Before using this product, read the instruction manual for important safety
information. Please retain this manual for future reference and warranty
information.
Troubleshooting & Servicing
Do not attempt to service or repair the device yourself. Refer all servicing
to qualied service personnel. Do not attempt to modify the device in any
way. Doing so could invalidate your warranty.
Moisture and heat sources
The HPE-1000 and HPE-1010 headphones/headsets are washable. All
other headphones/headsets are not. Follow the Maintenance & Cleaning
instructions in Section 5 of this manual carefully. At all other times, do
not use this apparatus near water (for example, sinks, baths, pools) or
expose it to rain, moisture, dripping or splashing liquids. Unless otherwise
specied, do not expose the unit to high temperatures, high humidity or
direct sunlight.
Location
Place the device in stable location, so it will not fall causing damage to
the device or bodily harm.
Intended use
The product may only be used with the original parts intended for it.
The product may only be used in closed and dry rooms. The intended
use includes adherence to the specied installation instructions. The
manufacturer accepts no liability for damage arising due to improper use.
2. PACKAGE CONTENTS
• HPE-series Headphone
• HPC-series Detachable Cord
• User Manual
• HPC-1020 also includes 3.5mm to 6.5mm adapter
3. PART NAMES AND FUNCTIONS
1. Volume Control
2. Power LED
3. Limiter ON/OFF Switch & LED
4. Mute Button
5. Mic Off Button & LED
6. Recharging Connector for
WS-CH Charger
califone.com
5. BASIC OPERATION
CAUTION: Avoid listening to the headphones at loud volume
settings for long periods of time as this can result in hearing damage.
Using the 85dB Limiter function may help reduce the risk of hearing
damage, but is in no way a guarantee.
HPC-1000 & HPC-1010 Operation
1. Adjust the headphone volume to minimum.
2. Connect the USB plug to the computer. The computer should
automatically detect and install the device. Wait until installation
is complete. If using Windows 98, an additional driver may be
required to install the device. Visit www.califone.com to download
the driver. The Power LED should light green.
3. On the computer, use the Audio Settings Control Panel/
Preferences to select the device to output audio.
4. Begin playing audio on the computer.
5. To help reduce peaks in the audio and reduce the risk of hearing
damage due to loud sounds in the headphones, enable the 85dB
Limiter by moving the Limiter switch to the ON position. The
Limiter LED should light green.
6. Increase the volume to the desired level.
7. The HPC-1010 also includes a Mic Off (to mute the microphone)
and MUTE button (to mute the audio output to the headphones).
Momentarily press the buttons to enable/disable these functions.
HPE-1020 & HPE-1030 Operation
1. The HPE-1020 and HPE-1030 Headphones include an internal
85 dB Limiter that can be switched on or off.
NOTE: The HPE-1020 and HPE-1030 will operate without a charged
battery, however, the limiter will not function.
Maintenance & Cleaning
NOTICE: Only the HPE-1000 and HPE-1010 Headphones are
washable. Other headphones/headsets and cords cannot be washed.
Washable Models:
1. Before washing, remove the cord and foam from the microphone.
2. To remove/replace the cord, push a small screwdriver or paper
clip into the hole where the cord connects to the earcup and pull
down on the cord.
3. Wash by hand with soap and water.
CAUTION: Allow headphones to dry thoroughly before use.
Non-Washable Models:
1. When cleaning the device, please use a soft, dry cloth. (Never
use benzene, paint-thinner, or other chemicals on the device.)
califone.com
1
2
4. SETUP AND INSTALLATION
1. If not already assembled, carefully plug the HPC-series cord into
the bottom of the HPE-series headphone/headset left earcup.
2. Use the WS-CH charger to recharge up to 4 sets of headphones
with internal batteries (HPE-1020 and HPE-1030). The WS-CH
will indicate when charging is complete. Refer to the WS-series
User Manual for details.
NOTICE: Do not connect any other type of power supply to the
headphones. Doing so may result in damage to the headphones.
LIMITER
O
N
OFF
DANGER:CONNECT
WS-CH SERIES
CHARGER ONLY
HPE-1020 & HPE-1030
Headphone - Left Earcup
Rear View
HPE-1020 & HPE-1030 Headphone
- Right Earcup Bottom View
2
3
3
6
3
6
5
 previous