Filter
Top Products
SP1.7 SPECIFICATIONS
Inputs
Analog Audio: Six stereo (RCA) pairs, One 5.1 channel (RCA) input
Digital: 4 coaxial (RCA) 75 Ohms, 2 Optical (TOSLINK?), conforms to S/PDIF standard.
Pro version 1 AES/EBU input (XLR) 110 Ohms
Infrared: 1 mini phone jack
RS-232: D9 connector (bidirectional)
Outputs
Analog Outputs: Left, Centre, Right, Right Surround, Left Surround, and Subwoofer on 6 unbalanced
(RCA) and 6 balanced (XLR).
2 stereo (RCA) pairs of Record Outputs.
1 pair (RCA) Surround Back outputs
Trigger: One 12V on/off trigger, One 12V programmable trigger, to source 80mA total.
Remote
30 button, Hand-Held, Infrared remote control unit operates with two AAA batteries (included).
Performance Specifications
A/D Conversion: 24-Bit, 48kHz Delta-Sigma
D/A Conversion: 24-Bit, 96kHz Delta-Sigma
DSP Engine: Motorola 56367
Power Supply: Dual, Linear, Toroidal
Frequency Response: 20Hz to 20kHz +/- 0.25 dB
THD+Noise: Less than 0.006% in DSP modes; Less than 0.0025% in Bypass mode 20Hz to
20kHz at maximum output level.
Signal-to-Noise Ratio: 105dB in DSP Modes; 110dB in 2ch Bypass Mode ; 22kHz bandwidth, Ref. 1kHz at
maximum output level
Input Level: 2 Vrms in DSP modes; 4 Vrms in Bypass Mode
Input Impedance: 50kOhms
Output Level: 8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode.
Output Impedance: 110 Ohms
Bass Management: 2nd Order HPF(x5), 4th Order LPF; 60 – 220 Hz Crossover Freq.
Physical Specifications
Power Requirements 100VAC, 115VAC, and 230VAC models. 200 VA. IEC detachable power cord (included)
Dimensions: 17” W x 13.5” D x 3.8” H; rackmount 19” W x 13.5” D x 3.5” H
Weight: approx 22 lbs (10 kg)
Chassis Temp: 0 to 50 deg Celsius
Specifications subject to change without notice.
36