Bryston BP6DA Stereo Amplifier User Manual


 
BP6 Preamplifiers
GENERAL SPECIFICATIONS:
Frequency Response: 20Hz-20kHz ±.05dB
Maximum Output: 15 Vrms
IMD/THD: <0.0015% at 3 volts out
Sensitivity: 500 mV (excluding phono inputs)
Noise: -100dB (Ref. 500mV input, 20-20kHz)
BP6 Features: Base model
4 pair of line level inputs (8 gold plated RCA jacks)
1 tape loop (2 pair of gold plated RCA jacks)
2 pair of parallel outputs (2 pair gold plated RCA jacks)
BP6P Features: with Phono Equalization Module
3 pair of line level inputs (8 gold plated RCA jacks)
1 pair moving magnet Phono inputs (2 gold plated
RCA jacks)
1 tape loop (2 pair of gold plated RCA jacks)
2 pair of parallel outputs (2 pair gold plated RCA jacks)
BP6DA Features: with Digital-to-Analog Converter Module
3 pair of line level inputs (8 gold plated RCA jacks)
1 SPDIF digital input (gold plated RCA jack)
1 tape loop (2 pair of gold plated RCA jacks)
2 pair of parallel outputs (2 pair gold plated RCA jacks)
Options:
Silver or Black faceplate, 17” or 19” wide
Rack mount (17” faceplate plus two 1” rack ears)
Hand held infra-red remote control (silver or black)
Dimensions:
17” wide version (standard): 17” x 2.25” x 11”
43.2cm x 5.7cm x 28cm
19” wide version: 19” x 2.25” x 11”
48.3cm x 5.7cm x 28cm
Rack mount version: 19” x 2.25” x 11”
48.3cm x 5.7cm x 28cm
Weight:
actual: 8.4 lb. (3.8Kg)
shipping: 12 lb. (5.4Kg)
Additional Specifications for BP6DA:
Input Sample Rate: 16kHz to 108kHz.
Word Length: 16, 18, 20, 24 Bit
Data format: SPDIF standard
Distortion: < 0.002%, 20Hz-20kHz
Signal to Noise Ratio: > 100dB
Frequency Response: 20Hz-20kHz ±.1dB
Additional Specifications for BP6P:
Phono Inputs:
Distortion: <0.005%, IMD or THD, any frequency
or combination of frequencies from 20-
20kHz, at rated output or below.
Rated Noise: Phono: -80dBA referred to an input of 5
millivolts RMS @ 1kHz
RIAA Accuracy: Within less than +/- 0.05dB from 20-
20kHz inclusive
Input sensitivity: 5mV
Serial Number, Date Code, Electrical Ratings & Model
ATTENTION: To obtain the model number and serial
number of this product please refer to the label attached
to the rear panel.
This label also contains electrical ratings and the date
code (date of manufacture). The date code is a 4 digit
code wherein the first 2 digits are the two least significant
digits of the year (e.g. “05” means the year 2005) and the
last two digits are the week of the year (numbered from
01 to 52)
3