Filter
Top Products
MOVING MAGNET PHONO EQUALIZATION
MODULE (optional)
Bryston’s optional phono stage circuitry features highly
accurate equalization, extremely low noise and distor-
tion and provides headroom margins sufficient to prevent
overload from any known phono source. If your turntable
provides a separate ground lead system noise may be mini-
mized by connecting it to the ground post adjacent to the
phono inputs on the rear panel.
Input impedance is 50K ohms and sensitivity is 5mV.
DIGITAL AUDIO INPUT MODULE (optional)
The BP6DA model contains one SPDIF compatible digital
audio input. To select the digital audio input, set the rotary
SELECTOR to DAC. The digital-to-analog convertor can
handle input sample rates from 16KHz to 108KHz, and
word lengths of 16, 18, 20 or 24 bits.
VISUAL INDICATORS
The bi-colour LED (light emitting diode) located on the
front panel lights GREEN when the power is on and RED
when the power is on and the output is muted
FRONT PANEL CONTROLS:
● VOLUME CONTROL: Rotary control varies the output
level to the main PREAMP OUT outputs (does not effect
‘TO TAPE’ outputs).
● BALANCE CONTROL: is a tailored-inflection type
which has very gradual action near the center of rota-
tion allowing fine adjustments to the stereo image.
For convenience the electrical center of the control is
detented.
● SOURCE SELECTOR SWITCH: Rotary switch deter-
mines which input will appear at the “TO TAPE” outputs
for recording or processing, as well as determining
which program is available at the Main outputs. (When
the “TAPE/NORMAL” switch is in “Tape” position,
“FROM TAPE” inputs appear at Main Outputs).
● TAPE/NORMAL SWITCH: “Normal” position monitors
whichever input is selected at the rotary SELECTOR
switch. “Tape” position provides monitoring of the
“FROM TAPE” input for A/B comparison with the source.
Should an external processor or equalizer be connected
in the tape loop, the ‘TAPE / NORMAL” switch will act
as an in/out switch for the external equipment.
BRYSTON LIMITED WARRANTY
Bryston analog audio circuits are warranted to be free from
manufacturing defects for twenty (20) years from the origi-
nal date of manufacture. The warranty includes parts and
labour.
Bryston Digital circuits are warranted for five years from
the original date of manufacture. The warranty includes
parts and labour.
Bryston circuits having motorized moving parts, exclud-
ing motorized volume controls, are warranted for three
years from the original date of manufacture. The warranty
includes parts and labour.
Bryston will remedy the problem by repair or replace-
ment, as we deem necessary, to restore the product to full
performance. Bryston will pay return shipping during the
first three years of warranty coverage.
The warranty is fully transferable to the original owner and
all subsequent owners during the warranty period. Warranty
coverage is automatic and commences with the original date
of manufacture which is kept on file at Bryston.
In the event of a defect or malfunction, contact Bryston’s
repair centers for return authorization.
Products must be returned using original packaging material
only. Packing material may be purchased from Bryston if
necessary.
This warranty is considered void if the defect, malfunction
or failure of the product or any component part was caused
by damage (not resulting from a defect or malfunction) or
abuse while in the possession of the customer. Tampering by
persons other than factory authorized service personnel, or
failure to fully comply with Bryston operating instructions,
voids the warranty.
This warranty gives you specific legal rights and you may
also have other rights which may vary from province to
province and country to country.
BP6 Preamplifiers
677 NEAL DRIVE
P.O. BOX 2170, Stn. Main
PETERBOROUGH, ONTARIO
CANADA K9J 7Y4
PHONE: 705-742-5325
FAX: 705-742-0882
E-mail: cdnser@bryston.ca
BRYSTON SERVICE in CANADA:
79 COVENTRY ST., Suite 5
NEWPORT, VERMONT
U.S.A. 05855-2100
PHONE: 802- 334-1201
FAX: 802-334-6658
E-mail: usaser@bryston.ca
BRYSTON SERVICE in the USA:
CONTACT YOUR LOCAL DISTRIBUTOR or:
CHECK OUR WEB SITE: www.bryston.ca
E-MAIL BRYSTON DIRECTLY: info@bryston.ca
FAX BRYSTON DIRECTLY: 01-705-742-0882
PHONE BRYSTON DIRECTLY: 01-705-743-5325
BRYSTON SERVICE outside Canada and the USA:
BRYSTON LTD., 677 NEAL DRIVE, P.O. BOX 2170, PETERBOROUGH, ONTARIO CANADA K9J 7Y4
BP6-OWNERS-MANUAL-20050929