Bryston 2BSST Stereo Amplifier User Manual


 
2Bsst SPECIFICATIONS:
Power Output: 100 watts per channel into 8 ohms
Input Impedance: 10K ohms single ended (unbalanced)
15K ohms double ended (balanced)
Sensitivity: 2v setting 2 Volts in = 100 Watts into 8 ohms - gain 23 dB
1v setting 1 Volt in = 100 Watts into 8 ohms - gain 29 dB
Distortion: THD+noise: < 0.010% 20Hz to 20kHz at 100 watts into 8 ohms,
IMD: < 0.010% 60Hz + 7KHz mixed 4:1
Noise: Measured with input shorted - 20Hz to 20kHz.
>108dB below rated output (with 20Hz to 22KHz bandpass filter)
Slew Rate: >60 volts per microsecond
Power Bandwidth: <1 Hz to over 100 kHz
Damping Factor: Over 500 at 20 Hz, ref. 8 ohms
Power consumption: idle 30va, maximum power 600va
Heat load: idle 100 btu/hr., max power 288 btu/hr
Dimensions: Regular model: Front Panel: 17.2” x 4”
Body: 16.9” wide X 3.5” high X 15.1” deep
(depth includes front panel and protrusion of rear panel connectors)
PRO model: Front Panel: 19” x 3.5” (2 rack units)
Body: 16.9” wide X 3.5” high X 15.1” deep
(depth includes front panel and protrusion of rear panel connectors)
Weight: approx. 28 lbs (12.7kg.)
2BSST
TWO CHANNEL POWER AMPLIFIER
3