Boss Audio Systems MC300 Stereo Amplifier User Manual


 
Changeable Grille
2.5mm Hex Screws
Installation
1. Changing the grilles (Optional) - Remove the screws in a criss-cross
pattern. Be sure to install them the same way, do not overtighten.
2. Screw the brackets to the bottom of the speakers.
3. Find a safe, ideal mounting location and t the brackets over the
chosen mounting bars.
4. Fasten the mounting screws after you review the safety of the
mounting location.
Wiring
1. Be sure to run the wiring securely and far away from any moving
components.
2. Connecting the power cable to the power source: You will need to
connect the 12V red wire to a (fused 5A) switched power source.
3. Use the 3.5mm stereo jack to connect to your entertainment source
(MP3 player, etc).
4. Use your player device and wired remote volume controller to control
your level of loudness.
2