Filter
Top Products
EnglishDeutschFrançaisKorean EspañolItalianoThai NederlandsS. ChinArabic
Thank you for purchasing the IC-1 (Integrated
Controller-1). It is designed to work with the
Wave
®
music system, providing easy access to
complete system functionality.
Placing the IC-1
With its feet securely seated in the IC-1 foot rests, the
Wave
®
music system sits firmly in position, just behind
the button panel.
This product conforms to the EMC
Directive 89/336/EEC and to the Low
Voltage Directive 73/23/EEC. The complete
Declaration of Conformity
can be found on www.bose.com
This product complies with the Canadian
ICES-003 Class B specifications.
Flat bottom section
Foot rests
Cable
Button panel
The Wave
®
Music System IC-1
1. Place the IC-1 on a solid and level surface with its
cable extended full length in back.
2. Lower the Wave
®
music system onto the flat
bottom section of the IC-1 until the front feet of
the Wave
®
music system slip into the foot rests.
3. Insert the connector of the IC-1 cable into the
Bose
®
link jack on the rear of the Wave
®
music
system.
With the Wave
®
music system plugged into an outlet,
the IC-1 is now ready for use.
Clean only with a dry cloth.
Foot rest
Foot rest
Cable
Bose
®
link jack
Connector
01.ENG.fm Page 2 Tuesday, July 12, 2005 4:08 PM