Filter
Top Products
AM257528_01_V.pdf October 26, 2001 9
Setting Up
Make the connections
At the connection end of the speaker, push one terminal lever and
insert the appropriate wire (Figure 6).
Figure 6
How to make ter-
minal connections
to the center
speaker and sur-
round speakers
1. Connect one end of the speaker cord to your speaker.
A. Attach the marked wire to the red (+) terminal.
B. Attach the plain wire to the black (–) terminal.
2. Connect the other end of the same cord to your receiver or
amplifier (Figure 7).
A. Attach the marked wire to the red (+) terminal.
B. Attach the plain wire to the black (–) terminal.
• The center speaker connects to the CENTER SPEAKER
outputs on the receiver. Some surround sound receivers
have two sets of center channel speaker outputs. Use
either set.
• The left surround speaker connects to the LEFT SUR-
ROUND SPEAKER outputs.
• The right surround speaker connects to the RIGHT SUR-
ROUND SPEAKER outputs.
Red terminal lever
Red terminal
lever
Marked wire
Marked wire