Filter
Top Products
12
Tab 3, 11Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 EnglishTab2, 10
Problem What to do
Computer and Wave
®
system do not connect.
Symptom B:
CONNECTING remains
on the Wave
®
system
display and the adapter
light blinks continuously.)
– NO SIGNAL – appears
eventually on the system
display.
Or, see Symptom A on the
previous page.
• Make sure the USB key is plugged in and your computer is turned on.
• Decrease the distance between the Acoustic Wave
®
system and your
computer.See “Connection range” on page 17.
•Try moving the Wave
®
system away from possible sources of interference
such as another wireless device, a microwave oven, or wireless computer
network router.
• If you are using a desktop computer, try moving the USB key to a port that
provides a more direct path to the adapter. Or use a USB extension cable,
available for purchase at computer stores.
• Remove the USB key from your computer, wait 30 seconds and insert it
again.
• Disconnect the power supply from the Wave
®
system and reconnect it.
• Try restoring the wireless link between the speaker and the USB key. See
“Manually linking the SoundLink
TM
adapter and USB key” on page 15.
SoundLink adapter_OG.book Page 12 Tuesday, July 7, 2009 10:43 AM