Bose SA-2 Stereo Amplifier User Manual


 
22
Setting Up Your Lifestyle
®
Stereo Amplifier
Powering-up your system
CAUTION: DO NOT plug the AC power cord into an AC (mains) outlet until all other connections
are complete.
1. Using the power cord included with your Lifestyle
®
stereo amplifier, firmly insert the small
connector on one end of the power cord into the AC power jack on the rear panel of the
amplifier (Figure 17).
2. Connect the power cord of the Lifestyle
®
stereo amplifier and your Lifestyle
®
music
system to an AC (mains) outlet. The status LED tells you the operational status of the
amplifier.
3. Select a music source with your Personal
®
music center or your new remote control and
adjust the volume to your liking.
Figure 17
Connecting the power cord
ROOM
CODE
Rear panel of Lifestyle
®
stereo amplifier
AC power cord
LED activity Meaning
Constant slow blinking
(1 sec on, 3 secs off)
Amplifier is off, but plugged into an
AC receptacle.
Constant slow blinking
(1 sec on, 5 secs off)
Amplifier is configured as a supple-
mental amplifier, turned on, but
plugged into an AC receptacle.
Continuously lit Amplifier is on and ready to produce
sound.
Lit but rapidly flickering Amplifier is configured as a supple-
mental amplifier.
Blinking quickly Amplifier is receiving data com-
mands through the Bose
®
link port.
Status LED